zZzzZ. — /usr/lib/dracut/modules.d/40network

Editing: net-lib.sh

#!/usr/bin/sh

# shellcheck disable=SC2034
IFNETFILE="/tmp/bootnetif"

is_ip() {
    echo "$1" | {
        IFS=. read -r a b c d
        test "$a" -ge 0 -a "$a" -le 255 \
            -a "$b" -ge 0 -a "$b" -le 255 \
            -a "$c" -ge 0 -a "$c" -le 255 \
            -a "$d" -ge 0 -a "$d" -le 255 \
            2> /dev/null
    } && return 0
    return 1
}

get_ip() {
    local iface="$1" ip=""
    ip=$(ip -f inet addr show "$iface")
    ip=${ip%%/*}
    ip=${ip##* }
    echo "$ip"
}

iface_for_remote_addr() {
    # shellcheck disable=SC2046
    set -- $(ip route get to "$@" | sed 's/.*\bdev\b//p;q')
    echo "$1"
}

iface_for_ip() {
    # shellcheck disable=SC2046
    set -- $(ip addr show to "$@")
    echo "${2%:}"
}

iface_for_mac() {
    local interface=""
    local mac
    mac="$(echo "$@" | sed 'y/ABCDEF/abcdef/')"
    for interface in /sys/class/net/*; do
        if [ "$(cat "$interface"/address)" = "$mac" ]; then
            echo "${interface##*/}"
        fi
    done
}

# get the iface name for the given identifier - either a MAC, IP, or iface name
iface_name() {
    case "$1" in
        ??:??:??:??:??:?? | ??-??-??-??-??-??) iface_for_mac "$1" ;;
        *:*:* | *.*.*.*) iface_for_ip "$1" ;;
        *) echo "$1" ;;
    esac
}

# list the configured interfaces
configured_ifaces() {
    local IFACES="" iface_id="" rv=1
    [ -e "/tmp/net.ifaces" ] && read -r IFACES < /tmp/net.ifaces
    if { pidof udevd || pidof systemd-udevd; } > /dev/null; then
        for iface_id in $IFACES; do
            printf "%s\n" "$(iface_name "$iface_id")"
            rv=0
        done
    else
        warn "configured_ifaces called before udev is running"
        echo "$IFACES"
        [ -n "$IFACES" ] && rv=0
    fi
    return $rv
}

all_ifaces_up() {
    local iface="" IFACES=""
    [ -e "/tmp/net.ifaces" ] && read -r IFACES < /tmp/net.ifaces
    for iface in $IFACES; do
        [ -e /tmp/net."$iface".up ] || return 1
    done
}

all_ifaces_setup() {
    local iface="" IFACES=""
    [ -e "/tmp/net.ifaces" ] && read -r IFACES < /tmp/net.ifaces
    for iface in $IFACES; do
        [ -e /tmp/net."$iface".did-setup ] || return 1
    done
}

get_netroot_ip() {
    local prefix="" server="" rest=""
    splitsep "$1" ":" prefix server rest
    case $server in
        [0-9]*\.[0-9]*\.[0-9]*\.[0-9]*)
            echo "$server"
            return 0
            ;;
    esac
    return 1
}

ip_is_local() {
    strstr "$(ip route get "$@" 2> /dev/null)" " via "
}

ifdown() {
    local netif="$1"
    # ip down/flush ensures that routing info goes away as well
    ip link set "$netif" down
    ip addr flush dev "$netif"
    echo "#empty" > /etc/resolv.conf
    rm -f -- /tmp/net."$netif".did-setup
    [ -z "$DO_VLAN" ] \
        && [ -e /sys/class/net/"$netif"/address ] \
        && rm -f -- "/tmp/net.$(cat /sys/class/net/"$netif"/address).did-setup"
    # TODO: send "offline" uevent?
}

setup_net() {
    local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES=""
    local _p
    [ -e /tmp/net."$netif".did-setup ] && return
    [ -z "$DO_VLAN" ] \
        && [ -e /sys/class/net/"$netif"/address ] \
        && [ -e "/tmp/net.$(cat /sys/class/net/"$netif"/address).did-setup" ] && return
    [ -e "/tmp/net.ifaces" ] && read -r IFACES < /tmp/net.ifaces
    [ -z "$IFACES" ] && IFACES="$netif"
    # run the scripts written by ifup
    if [ -e /tmp/net."$netif".hostname ]; then
        if grep -qE '[$`;&|(]' /tmp/net."$netif".hostname 2>/dev/null; then
            warn "setup_net $netif: /tmp/net.$netif.hostname contains suspicious shell metacharacters"
        fi
        # shellcheck disable=SC1090
        . /tmp/net."$netif".hostname
    fi
    # shellcheck disable=SC1090
    [ -e /tmp/net."$netif".override ] && . /tmp/net."$netif".override
    # shellcheck disable=SC1090
    [ -e /tmp/dhclient."$netif".dhcpopts ] && . /tmp/dhclient."$netif".dhcpopts
    # set up resolv.conf
    [ -e /tmp/net."$netif".resolv.conf ] \
        && awk '!array[$0]++' /tmp/net."$netif".resolv.conf > /etc/resolv.conf
    # shellcheck disable=SC1090
    [ -e /tmp/net."$netif".gw ] && . /tmp/net."$netif".gw

# add static route
    for _p in $(getargs rd.route); do
        route_to_var "$_p" || continue
        [ -n "$route_dev" ] && [ "$route_dev" != "$netif" ] && continue
        ip route add "$route_mask" ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}
        if strstr "$route_mask" ":"; then
            printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
                > /tmp/net.route6."$netif"
        else
            printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
                > /tmp/net.route."$netif"
        fi
    done

# If a static route was necessary to reach the gateway, the
    # first gateway setup call will have failed with
    #     RTNETLINK answers: Network is unreachable
    # Replace the default route again after static routes to cover
    # this scenario.
    # shellcheck disable=SC1090
    [ -e /tmp/net."$netif".gw ] && . /tmp/net."$netif".gw

# Handle STP Timeout: arping the default gateway.
    # (or the root server, if a) it's local or b) there's no gateway.)
    # Note: This assumes that if no router is present the
    # root server is on the same subnet.

# Get DHCP-provided router IP, or the cmdline-provided "gw=" argument
    [ -n "$new_routers" ] && gw_ip=${new_routers%%,*}
    [ -n "$gw" ] && gw_ip=$gw

# Get the "netroot" IP (if there's an IP address in there)
    netroot_ip=$(get_netroot_ip "$netroot")

# try netroot if it's local (or there's no gateway)
    if ip_is_local "$netroot_ip" || [ -z "$gw_ip" ]; then
        dest="$netroot_ip"
    else
        dest="$gw_ip"
    fi

unset layer2
    if [ -f /sys/class/net/"$netif"/device/layer2 ]; then
        read -r layer2 < /sys/class/net/"$netif"/device/layer2
    fi

if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! strstr "$dest" ":"; then
        if command -v arping2 > /dev/null; then
            arping2 -q -C 1 -c 60 -I "$netif" "$dest" || info "Resolving $dest via ARP on $netif failed"
        else
            arping -q -f -w 60 -I "$netif" "$dest" || info "Resolving $dest via ARP on $netif failed"
        fi
    fi
    unset layer2

: > /tmp/net."$netif".did-setup
    [ -z "$DO_VLAN" ] \
        && [ -e /sys/class/net/"$netif"/address ] \
        && : > "/tmp/net.$(cat /sys/class/net/"$netif"/address).did-setup"
}

save_netinfo() {
    local netif="$1" IFACES="" f="" i=""
    [ -e /tmp/net.ifaces ] && read -r IFACES < /tmp/net.ifaces
    # Add $netif to the front of IFACES (if it's not there already).
    set -- "$netif"
    for i in $IFACES; do [ "$i" != "$netif" ] && set -- "$@" "$i"; done
    IFACES="$*"
    for i in $IFACES; do
        for f in "/tmp/dhclient.$i."*; do
            [ -f "$f" ] && cp -f "$f" /tmp/net."${f#/tmp/dhclient.}"
        done
    done
    echo "$IFACES" > /tmp/.net.ifaces.new
    mv /tmp/.net.ifaces.new /tmp/net.ifaces
}

set_ifname() {
    local name="$1" mac="$2" num=-1 n=""
    # if it's already set, return the existing name
    for n in $(getargs ifname=); do
        strstr "$n" "$mac" && echo "${n%%:*}" && return
    done
    # otherwise, pick a new name and use that
    while :; do
        num=$((num + 1))
        [ -e /sys/class/net/"$name"$num ] && continue
        for n in $(getargs ifname=); do
            [ "$name$num" = "${n%%:*}" ] && continue 2
        done
        break
    done
    echo "ifname=$name$num:$mac" >> /etc/cmdline.d/45-ifname.conf
    echo "$name$num"
}

# pxelinux provides macaddr '-' separated, but we need ':'
fix_bootif() {
    local macaddr=${1}
    local IFS='-'
    # shellcheck disable=SC2086
    macaddr=$(printf '%s:' ${macaddr})
    macaddr=${macaddr%:}
    # strip hardware type field from pxelinux
    [ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:}
    # return macaddr with lowercase alpha characters expected by udev
    echo "$macaddr" | sed 'y/ABCDEF/abcdef/'
}

ibft_to_cmdline() {
    local iface=""
    modprobe -q iscsi_ibft
    (
        for iface in /sys/firmware/ibft/ethernet*; do
            local mac="" dev=""
            local dhcp="" ip="" gw="" mask="" hostname=""
            local dns1 dns2

[ -e "${iface}"/mac ] || continue
            read -r mac < "${iface}"/mac
            [ -z "$mac" ] && continue
            dev=$(set_ifname ibft "$mac")

[ -e /tmp/net."${dev}".has_ibft_config ] && continue

[ -e "${iface}"/flags ] && read -r flags < "${iface}"/flags
            # Skip invalid interfaces
            awk -- 'BEGIN { exit (!and('"$flags"',1)) }' || continue
            # Skip interfaces not used for booting unless using multipath
            if ! getargbool 0 rd.iscsi.mp; then
                awk -- 'BEGIN { exit (!and('"$flags"',2)) }' || continue
            fi
            [ -e "${iface}"/dhcp ] && read -r dhcp < "${iface}"/dhcp
            [ -e "${iface}"/origin ] && read -r origin < "${iface}"/origin
            [ -e "${iface}"/ip-addr ] && read -r ip < "${iface}"/ip-addr

if [ -n "$ip" ]; then
                case "$ip" in
                    *.*.*.*)
                        family=ipv4
                        ;;
                    *:*)
                        family=ipv6
                        ;;
                esac
            fi
            if [ -n "$dhcp" ] || [ "$origin" -eq 3 ]; then
                if [ "$family" = "ipv6" ]; then
                    echo "ip=$dev:dhcp6"
                else
                    echo "ip=$dev:dhcp"
                fi
            elif [ -e "${iface}"/ip-addr ]; then
                # skip not assigned ip adresses
                [ "$ip" = "0.0.0.0" ] && continue
                [ -e "${iface}"/gateway ] && read -r gw < "${iface}"/gateway
                [ "$gw" = "0.0.0.0" ] && unset gw
                [ -e "${iface}"/subnet-mask ] && read -r mask < "${iface}"/subnet-mask
                [ -e "${iface}"/prefix-len ] && read -r prefix < "${iface}"/prefix-len
                [ -e "${iface}"/primary-dns ] && read -r dns1 < "${iface}"/primary-dns
                [ "$dns1" = "0.0.0.0" ] && unset dns1
                [ -e "${iface}"/secondary-dns ] && read -r dns2 < "${iface}"/secondary-dns
                [ "$dns2" = "0.0.0.0" ] && unset dns
                [ -e "${iface}"/hostname ] && read -r hostname < "${iface}"/hostname
                if [ "$family" = "ipv6" ]; then
                    if [ -n "$ip" ]; then
                        ip="[$ip]"
                        [ -n "$prefix" ] || prefix=64
                        ip="[${ip}/${prefix}]"
                        mask=
                    fi
                    if [ -n "$gw" ]; then
                        gw="[${gw}]"
                    fi
                fi
                if [ -n "$ip" ] && [ -n "$mask" -o -n "$prefix" ]; then
                    echo "ip=$ip::$gw:$mask:$hostname:$dev:none${dns1:+:$dns1}${dns2:+:$dns2}"
                else
                    warn "${iface} does not contain a valid iBFT configuration"
                    warn "ip-addr=$ip"
                    warn "gateway=$gw"
                    warn "subnet-mask=$mask"
                    warn "hostname=$hostname"
                fi
            else
                info "${iface} does not contain a valid iBFT configuration"
                # shellcheck disable=SC2012
                ls -l "${iface}" | vinfo
            fi

if [ -e "${iface}"/vlan ]; then
                read -r vlan < "${iface}"/vlan
                if [ "$vlan" -ne "0" ]; then
                    case "$vlan" in
                        [0-9]*)
                            echo "vlan=$dev.$vlan:$dev"
                            echo "$mac" > /tmp/net."${dev}"."${vlan}".has_ibft_config
                            ;;
                        *)
                            echo "vlan=$vlan:$dev"
                            echo "$mac" > /tmp/net."${vlan}".has_ibft_config
                            ;;
                    esac
                else
                    echo "$mac" > /tmp/net."${dev}".has_ibft_config
                fi
            else
                echo "$mac" > /tmp/net."${dev}".has_ibft_config
            fi

done
    ) >> /etc/cmdline.d/40-ibft.conf
}

parse_iscsi_root() {
    local v
    v=${1#iscsi:}

# extract authentication info
    case "$v" in
        *@*:*:*:*:*)
            authinfo=${v%%@*}
            v=${v#*@}
            # allow empty authinfo to allow having an @ in iscsi_target_name like this:
            # netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
            if [ -n "$authinfo" ]; then
                OLDIFS="$IFS"
                IFS=:
                # shellcheck disable=SC2086
                set $authinfo
                IFS="$OLDIFS"
                if [ $# -gt 4 ]; then
                    warn "Wrong authentication info in iscsi: parameter!"
                    return 1
                fi
                iscsi_username=$1
                iscsi_password=$2
                if [ $# -gt 2 ]; then
                    iscsi_in_username=$3
                    iscsi_in_password=$4
                fi
            fi
            ;;
    esac

# extract target ip
    case "$v" in
        [[]*[]]:*)
            iscsi_target_ip=${v#[[]}
            iscsi_target_ip=${iscsi_target_ip%%[]]*}
            # shellcheck disable=SC1087
            v=${v#[[]$iscsi_target_ip[]]:}
            ;;
        *)
            iscsi_target_ip=${v%%[:]*}
            v=${v#$iscsi_target_ip:}
            ;;
    esac

unset iscsi_target_name
    # extract target name
    case "$v" in
        *:iqn.*)
            iscsi_target_name=iqn.${v##*:iqn.}
            v=${v%:iqn.*}:
            ;;
        *:eui.*)
            iscsi_target_name=eui.${v##*:eui.}
            v=${v%:eui.*}:
            ;;
        *:naa.*)
            iscsi_target_name=naa.${v##*:naa.}
            v=${v%:naa.*}:
            ;;
    esac

# parse the rest
    OLDIFS="$IFS"
    IFS=:
    # shellcheck disable=SC2086
    set $v
    IFS="$OLDIFS"

iscsi_protocol=$1
    shift # ignored
    iscsi_target_port=$1
    shift

if [ -n "$iscsi_target_name" ]; then
        if [ $# -eq 3 ]; then
            iscsi_iface_name=$1
            shift
        fi
        if [ $# -eq 2 ]; then
            iscsi_netdev_name=$1
            shift
        fi
        iscsi_lun=$1
        shift
        if [ $# -ne 0 ]; then
            warn "Invalid parameter in iscsi: parameter!"
            return 1
        fi
        return 0
    fi

if [ $# -gt 3 ] && [ -n "$1$2" ]; then
        if [ -z "$3" ] || [ "$3" -ge 0 ] 2> /dev/null; then
            iscsi_iface_name=$1
            shift
            iscsi_netdev_name=$1
            shift
        fi
    fi

iscsi_lun=$1
    shift

iscsi_target_name=$(printf "%s:" "$@")
    iscsi_target_name=${iscsi_target_name%:}
}

ip_to_var() {
    local v=${1}:
    local i
    set --
    while [ -n "$v" ]; do
        if [ "${v#\[*:*:*\]:}" != "$v" ]; then
            # handle IPv6 address
            i="${v%%\]:*}"
            i="${i##\[}"
            set -- "$@" "$i"
            v=${v#\[$i\]:}
        else
            set -- "$@" "${v%%:*}"
            v=${v#*:}
        fi
    done

unset ip srv gw mask hostname dev autoconf macaddr mtu dns1 dns2

if [ $# -eq 0 ]; then
        autoconf="error"
        return 0
    fi

if [ $# -eq 1 ]; then
        # format: ip={dhcp|on|any|dhcp6|auto6|either6|single-dhcp}
        # or
        #         ip=<ipv4-address> means anaconda-style static config argument cluster
        autoconf="$1"

if strglob "$autoconf" "*.*.*.*"; then
            # ip=<ipv4-address> means anaconda-style static config argument cluster:
            # ip=<ip> gateway=<gw> netmask=<nm> hostname=<host> mtu=<mtu>
            # ksdevice={link|bootif|ibft|<MAC>|<ifname>}
            ip="$autoconf"
            gw=$(getarg gateway=)
            mask=$(getarg netmask=)
            hostname=$(getarg hostname=)
            dev=$(getarg ksdevice=)
            autoconf="none"
            mtu=$(getarg mtu=)

# handle special values for ksdevice
            case "$dev" in
                bootif | BOOTIF) dev=$(fix_bootif "$(getarg BOOTIF=)") ;;
                link) dev="" ;; # FIXME: do something useful with this
                ibft) dev="" ;; # ignore - ibft is handled elsewhere
            esac
        fi
        return 0
    fi

if [ "$2" = "dhcp" -o "$2" = "on" -o "$2" = "any" -o "$2" = "dhcp6" -o "$2" = "auto6" -o "$2" = "either6" ]; then
        # format: ip=<interface>:{dhcp|on|any|dhcp6|auto6}[:[<mtu>][:<macaddr>]]
        [ -n "$1" ] && dev="$1"
        [ -n "$2" ] && autoconf="$2"
        [ -n "$3" ] && mtu=$3
        if [ -z "$5" ]; then
            macaddr="$4"
        else
            macaddr="${4}:${5}:${6}:${7}:${8}:${9}"
        fi
        return 0
    fi

# format: ip=<client-IP>:[<peer>]:<gateway-IP>:<netmask>:<client_hostname>:<interface>:{none|off|dhcp|on|any|dhcp6|auto6|ibft}:[:[<mtu>][:<macaddr>]]

[ -n "$1" ] && ip=$1
    [ -n "$2" ] && srv=$2
    [ -n "$3" ] && gw=$3
    [ -n "$4" ] && mask=$4
    [ -n "$5" ] && hostname=$5
    [ -n "$6" ] && dev=$6
    [ -n "$7" ] && autoconf=$7
    case "$8" in
        [0-9a-fA-F]*:* | [0-9]*.[0-9]*.[0-9]*.[0-9]*)
            dns1="$8"
            [ -n "$9" ] && dns2="$9"
            ;;
        [0-9]*)
            mtu="$8"
            if [ -n "${9}" -a -z "${10}" ]; then
                macaddr="${9}"
            elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
                macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
            fi
            ;;
        *)
            if [ -n "${9}" -a -z "${10}" ]; then
                macaddr="${9}"
            elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
                macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
            fi
            ;;
    esac
    return 0
}

route_to_var() {
    local v=${1}:
    local i
    set --
    while [ -n "$v" ]; do
        if [ "${v#\[*:*:*\]:}" != "$v" ]; then
            # handle IPv6 address
            i="${v%%\]:*}"
            i="${i##\[}"
            set -- "$@" "$i"
            v=${v#\[$i\]:}
        else
            set -- "$@" "${v%%:*}"
            v=${v#*:}
        fi
    done

unset route_mask route_gw route_dev
    case $# in
        2)
            [ -n "$1" ] && route_mask="$1"
            [ -n "$2" ] && route_gw="$2"
            return 0
            ;;
        3)
            [ -n "$1" ] && route_mask="$1"
            [ -n "$2" ] && route_gw="$2"
            [ -n "$3" ] && route_dev="$3"
            return 0
            ;;
        *) return 1 ;;
    esac
}

parse_ifname_opts() {
    local IFS=:
    # shellcheck disable=SC2086
    set -- $1

case $# in
        7)
            ifname_if=$1
            # udev requires MAC addresses to be lower case
            ifname_mac=$(echo "$2:$3:$4:$5:$6:$7" | sed 'y/ABCDEF/abcdef/')
            ;;
        21)
            ifname_if=$1
            # udev requires MAC addresses to be lower case
            ifname_mac=$(echo "$2:$3:$4:$5:$6:$7:$8:$9:${10}:${11}:${12}:${13}:${14}:${15}:${16}:${17}:${18}:${19}:${20}:${21}" | sed 'y/ABCDEF/abcdef/')
            ;;
        *)
            die "Invalid arguments for ifname="
            ;;
    esac

case $ifname_if in
        eth[0-9] | eth[0-9][0-9] | eth[0-9][0-9][0-9] | eth[0-9][0-9][0-9][0-9])
            warn "ifname=$ifname_if uses the kernel name space for interfaces"
            warn "This can fail for multiple network interfaces and is discouraged!"
            warn 'Please use a custom name like "netboot" or "bluesocket"'
            warn "or use biosdevname and no ifname= at all."
            ;;
    esac

}

# some network driver need long time to initialize, wait before it's ready.
wait_for_if_link() {
    local cnt=0
    local li
    local timeout
    timeout=$(getargs rd.net.timeout.iflink=)
    timeout=${timeout:-60}
    timeout=$((timeout * 10))

while [ $cnt -lt $timeout ]; do
        li=$(ip link show dev "$@" 2> /dev/null)
        [ -n "$li" ] && return 0
        sleep 0.1
        cnt=$((cnt + 1))
    done
    return 1
}

wait_for_if_up() {
    local cnt=0
    local li
    local timeout
    timeout=$(getargs rd.net.timeout.ifup=)
    timeout=${timeout:-20}
    timeout=$((timeout * 10))

while [ $cnt -lt $timeout ]; do
        li=$(ip link show up dev "$@")
        if [ -n "$li" ]; then
            case "$li" in
                *\<UP*)
                    return 0
                    ;;
                *\<*,UP\>*)
                    return 0
                    ;;
                *\<*,UP,*\>*)
                    return 0
                    ;;
            esac
        fi
        if strstr "$li" "LOWER_UP" \
            && strstr "$li" "state UNKNOWN" \
            && ! strstr "$li" "DORMANT"; then
            return 0
        fi
        sleep 0.1
        cnt=$((cnt + 1))
    done
    return 1
}

wait_for_route_ok() {
    local cnt=0
    local timeout
    timeout=$(getargs rd.net.timeout.route=)
    timeout=${timeout:-20}
    timeout=$((timeout * 10))

while [ $cnt -lt $timeout ]; do
        li=$(ip route show)
        [ -n "$li" ] && [ -z "${li##*$1*}" ] && return 0
        sleep 0.1
        cnt=$((cnt + 1))
    done
    return 1
}

wait_for_ipv6_dad_link() {
    local cnt=0
    local timeout
    timeout=$(getargs rd.net.timeout.ipv6dad=)
    timeout=${timeout:-50}
    timeout=$((timeout * 10))

while [ $cnt -lt $timeout ]; do
        [ -n "$(ip -6 addr show dev "$@" scope link)" ] \
            && [ -z "$(ip -6 addr show dev "$@" scope link tentative)" ] \
            && return 0
        [ -n "$(ip -6 addr show dev "$@" scope link dadfailed)" ] \
            && return 1
        sleep 0.1
        cnt=$((cnt + 1))
    done
    return 1
}

wait_for_ipv6_dad() {
    local cnt=0
    local timeout
    timeout=$(getargs rd.net.timeout.ipv6dad=)
    timeout=${timeout:-50}
    timeout=$((timeout * 10))

while [ $cnt -lt $timeout ]; do
        [ -n "$(ip -6 addr show dev "$@")" ] \
            && [ -z "$(ip -6 addr show dev "$@" tentative)" ] \
            && { ip -6 route list proto ra dev "$@" | grep -q ^default; } \
            && return 0
        [ -n "$(ip -6 addr show dev "$@" dadfailed)" ] \
            && return 1
        sleep 0.1
        cnt=$((cnt + 1))
    done
    return 1
}

wait_for_ipv6_auto() {
    local cnt=0
    local timeout
    timeout=$(getargs rd.net.timeout.ipv6auto=)
    timeout=${timeout:-40}
    timeout=$((timeout * 10))

while [ $cnt -lt $timeout ]; do
        [ -z "$(ip -6 addr show dev "$@" tentative)" ] \
            && { ip -6 route list proto ra dev "$@" | grep -q ^default; } \
            && return 0
        sleep 0.1
        cnt=$((cnt + 1))
    done
    return 1
}

linkup() {
    wait_for_if_link "$@" 2> /dev/null && ip link set "$@" up 2> /dev/null && wait_for_if_up "$@" 2> /dev/null
}

type hostname > /dev/null 2>&1 \
    || hostname() {
        cat /proc/sys/kernel/hostname
    }

iface_has_carrier() {
    local cnt=0
    local iface="$1" flags=""
    local timeout
    local iface_sys_path
    [ -n "$iface" ] || return 2
    iface_sys_path="/sys/class/net/$iface"
    [ -d "$iface_sys_path" ] || return 2
    timeout=$(getargs rd.net.timeout.carrier=)
    timeout=${timeout:-10}
    timeout=$((timeout * 10))

linkup "$1"

li=$(ip link show up dev "$iface")
    strstr "$li" "NO-CARRIER" && _no_carrier_flag=1

while [ $cnt -lt $timeout ]; do
        if [ -n "$_no_carrier_flag" ]; then
            li=$(ip link show up dev "$iface")
            # NO-CARRIER flag was cleared
            strstr "$li" "NO-CARRIER" || return 0
        elif ! [ -e "$iface_sys_path/carrier" ]; then
            # sysfs not available and "NO-CARRIER" not displayed
            return 0
        fi
        # double check the syscfs carrier flag
        [ -e "$iface_sys_path/carrier" ] && [ "$(cat "$iface_sys_path"/carrier)" = 1 ] && return 0
        sleep 0.1
        cnt=$((cnt + 1))
    done
    return 1
}

iface_has_link() {
    iface_has_carrier "$@"
}

iface_is_enslaved() {
    local _li
    _li=$(ip link show dev "$@")
    strstr "$_li" " master " || return 1
    return 0
}

find_iface_with_link() {
    local iface_path="" iface=""
    for iface_path in /sys/class/net/*; do
        iface=${iface_path##*/}
        str_starts "$iface" "lo" && continue
        if iface_has_link "$iface"; then
            echo "$iface"
            return 0
        fi
    done
    return 1
}

is_persistent_ethernet_name() {
    local _netif="$1"
    local _name_assign_type="0"

[ -f "/sys/class/net/$_netif/name_assign_type" ] \
        && _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type" 2> /dev/null)

# NET_NAME_ENUM 1
    [ "$_name_assign_type" = "1" ] && return 1

# NET_NAME_PREDICTABLE 2
    [ "$_name_assign_type" = "2" ] && return 0

case "$_netif" in
        # udev persistent interface names
        eno[0-9] | eno[0-9][0-9] | eno[0-9][0-9][0-9]*) ;;

ens[0-9] | ens[0-9][0-9] | ens[0-9][0-9][0-9]*) ;;

enp[0-9]s[0-9]* | enp[0-9][0-9]s[0-9]* | enp[0-9][0-9][0-9]*s[0-9]*) ;;

enP*p[0-9]s[0-9]* | enP*p[0-9][0-9]s[0-9]* | enP*p[0-9][0-9][0-9]*s[0-9]*) ;;

# biosdevname
        em[0-9] | em[0-9][0-9] | em[0-9][0-9][0-9]*) ;;

p[0-9]p[0-9]* | p[0-9][0-9]p[0-9]* | p[0-9][0-9][0-9]*p[0-9]*) ;;

*)
            return 1
            ;;
    esac
    return 0
}

is_kernel_ethernet_name() {
    local _netif="$1"
    local _name_assign_type="1"

if [ -e "/sys/class/net/$_netif/name_assign_type" ]; then
        _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")

case "$_name_assign_type" in
            2 | 3 | 4)
                # NET_NAME_PREDICTABLE 2
                # NET_NAME_USER 3
                # NET_NAME_RENAMED 4
                return 1
                ;;
            1 | *)
                # NET_NAME_ENUM 1
                return 0
                ;;
        esac
    fi

# fallback to error prone manual name check
    case "$_netif" in
        eth[0-9] | eth[0-9][0-9] | eth[0-9][0-9][0-9]*)
            return 0
            ;;
        *)
            return 1
            ;;
    esac

}

iface_get_subchannels() {
    local _netif
    local _subchannels

_netif="$1"

_subchannels=$({
        for i in /sys/class/net/"$_netif"/device/cdev[0-9]*; do
            [ -e "$i" ] || continue
            channel=$(readlink -f "$i")
            printf -- "%s" "${channel##*/},"
        done
    })
    [ -n "$_subchannels" ] || return 1

printf -- "%s" "${_subchannels%,}"
}