zZzzZ.
usr
/
include
/
drm
New Folder
Editing: xe_drm.h
Save
Cancel
/* SPDX-License-Identifier: MIT */ /* * Copyright © 2023 Intel Corporation */ #ifndef _XE_DRM_H_ #define _XE_DRM_H_ #include "drm.h" #if defined(__cplusplus) extern "C" { #endif /* * Please note that modifications to all structs defined here are * subject to backwards-compatibility constraints. * Sections in this file are organized as follows: * 1. IOCTL definition * 2. Extension definition and helper structs * 3. IOCTL's Query structs in the order of the Query's entries. * 4. The rest of IOCTL structs in the order of IOCTL declaration. */ /** * DOC: Xe Device Block Diagram * * The diagram below represents a high-level simplification of a discrete * GPU supported by the Xe driver. It shows some device components which * are necessary to understand this API, as well as how their relations * to each other. This diagram does not represent real hardware:: * * ┌──────────────────────────────────────────────────────────────────┐ * │ ┌──────────────────────────────────────────────────┐ ┌─────────┐ │ * │ │ ┌───────────────────────┐ ┌─────┐ │ │ ┌─────┐ │ │ * │ │ │ VRAM0 ├───┤ ... │ │ │ │VRAM1│ │ │ * │ │ └───────────┬───────────┘ └─GT1─┘ │ │ └──┬──┘ │ │ * │ │ ┌──────────────────┴───────────────────────────┐ │ │ ┌──┴──┐ │ │ * │ │ │ ┌─────────────────────┐ ┌─────────────────┐ │ │ │ │ │ │ │ * │ │ │ │ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │ │ ┌─────┐ ┌─────┐ │ │ │ │ │ │ │ │ * │ │ │ │ │EU│ │EU│ │EU│ │EU│ │ │ │RCS0 │ │BCS0 │ │ │ │ │ │ │ │ │ * │ │ │ │ └──┘ └──┘ └──┘ └──┘ │ │ └─────┘ └─────┘ │ │ │ │ │ │ │ │ * │ │ │ │ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │ │ ┌─────┐ ┌─────┐ │ │ │ │ │ │ │ │ * │ │ │ │ │EU│ │EU│ │EU│ │EU│ │ │ │VCS0 │ │VCS1 │ │ │ │ │ │ │ │ │ * │ │ │ │ └──┘ └──┘ └──┘ └──┘ │ │ └─────┘ └─────┘ │ │ │ │ │ │ │ │ * │ │ │ │ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │ │ ┌─────┐ ┌─────┐ │ │ │ │ │ │ │ │ * │ │ │ │ │EU│ │EU│ │EU│ │EU│ │ │ │VECS0│ │VECS1│ │ │ │ │ │ ... │ │ │ * │ │ │ │ └──┘ └──┘ └──┘ └──┘ │ │ └─────┘ └─────┘ │ │ │ │ │ │ │ │ * │ │ │ │ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │ │ ┌─────┐ ┌─────┐ │ │ │ │ │ │ │ │ * │ │ │ │ │EU│ │EU│ │EU│ │EU│ │ │ │CCS0 │ │CCS1 │ │ │ │ │ │ │ │ │ * │ │ │ │ └──┘ └──┘ └──┘ └──┘ │ │ └─────┘ └─────┘ │ │ │ │ │ │ │ │ * │ │ │ └─────────DSS─────────┘ │ ┌─────┐ ┌─────┐ │ │ │ │ │ │ │ │ * │ │ │ │ │CCS2 │ │CCS3 │ │ │ │ │ │ │ │ │ * │ │ │ ┌─────┐ ┌─────┐ ┌─────┐ │ └─────┘ └─────┘ │ │ │ │ │ │ │ │ * │ │ │ │ ... │ │ ... │ │ ... │ │ │ │ │ │ │ │ │ │ * │ │ │ └─DSS─┘ └─DSS─┘ └─DSS─┘ └─────Engines─────┘ │ │ │ │ │ │ │ * │ │ └───────────────────────────GT0────────────────┘ │ │ └─GT2─┘ │ │ * │ └────────────────────────────Tile0─────────────────┘ └─ Tile1──┘ │ * └─────────────────────────────Device0───────┬──────────────────────┘ * │ * ───────────────────────┴────────── PCI bus */ /** * DOC: Xe uAPI Overview * * This section aims to describe the Xe's IOCTL entries, its structs, and other * Xe related uAPI such as uevents and PMU (Platform Monitoring Unit) related * entries and usage. * * List of supported IOCTLs: * - &DRM_IOCTL_XE_DEVICE_QUERY * - &DRM_IOCTL_XE_GEM_CREATE * - &DRM_IOCTL_XE_GEM_MMAP_OFFSET * - &DRM_IOCTL_XE_VM_CREATE * - &DRM_IOCTL_XE_VM_DESTROY * - &DRM_IOCTL_XE_VM_BIND * - &DRM_IOCTL_XE_EXEC_QUEUE_CREATE * - &DRM_IOCTL_XE_EXEC_QUEUE_DESTROY * - &DRM_IOCTL_XE_EXEC_QUEUE_GET_PROPERTY * - &DRM_IOCTL_XE_EXEC * - &DRM_IOCTL_XE_WAIT_USER_FENCE * - &DRM_IOCTL_XE_OBSERVATION * - &DRM_IOCTL_XE_MADVISE * - &DRM_IOCTL_XE_VM_QUERY_MEM_RANGE_ATTRS */ /* * xe specific ioctls. * * The device specific ioctl range is [DRM_COMMAND_BASE, DRM_COMMAND_END) ie * [0x40, 0xa0) (a0 is excluded). The numbers below are defined as offset * against DRM_COMMAND_BASE and should be between [0x0, 0x60). */ #define DRM_XE_DEVICE_QUERY 0x00 #define DRM_XE_GEM_CREATE 0x01 #define DRM_XE_GEM_MMAP_OFFSET 0x02 #define DRM_XE_VM_CREATE 0x03 #define DRM_XE_VM_DESTROY 0x04 #define DRM_XE_VM_BIND 0x05 #define DRM_XE_EXEC_QUEUE_CREATE 0x06 #define DRM_XE_EXEC_QUEUE_DESTROY 0x07 #define DRM_XE_EXEC_QUEUE_GET_PROPERTY 0x08 #define DRM_XE_EXEC 0x09 #define DRM_XE_WAIT_USER_FENCE 0x0a #define DRM_XE_OBSERVATION 0x0b #define DRM_XE_MADVISE 0x0c #define DRM_XE_VM_QUERY_MEM_RANGE_ATTRS 0x0d /* Must be kept compact -- no holes */ #define DRM_IOCTL_XE_DEVICE_QUERY DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_DEVICE_QUERY, struct drm_xe_device_query) #define DRM_IOCTL_XE_GEM_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_GEM_CREATE, struct drm_xe_gem_create) #define DRM_IOCTL_XE_GEM_MMAP_OFFSET DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_GEM_MMAP_OFFSET, struct drm_xe_gem_mmap_offset) #define DRM_IOCTL_XE_VM_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_VM_CREATE, struct drm_xe_vm_create) #define DRM_IOCTL_XE_VM_DESTROY DRM_IOW(DRM_COMMAND_BASE + DRM_XE_VM_DESTROY, struct drm_xe_vm_destroy) #define DRM_IOCTL_XE_VM_BIND DRM_IOW(DRM_COMMAND_BASE + DRM_XE_VM_BIND, struct drm_xe_vm_bind) #define DRM_IOCTL_XE_EXEC_QUEUE_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_EXEC_QUEUE_CREATE, struct drm_xe_exec_queue_create) #define DRM_IOCTL_XE_EXEC_QUEUE_DESTROY DRM_IOW(DRM_COMMAND_BASE + DRM_XE_EXEC_QUEUE_DESTROY, struct drm_xe_exec_queue_destroy) #define DRM_IOCTL_XE_EXEC_QUEUE_GET_PROPERTY DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_EXEC_QUEUE_GET_PROPERTY, struct drm_xe_exec_queue_get_property) #define DRM_IOCTL_XE_EXEC DRM_IOW(DRM_COMMAND_BASE + DRM_XE_EXEC, struct drm_xe_exec) #define DRM_IOCTL_XE_WAIT_USER_FENCE DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_WAIT_USER_FENCE, struct drm_xe_wait_user_fence) #define DRM_IOCTL_XE_OBSERVATION DRM_IOW(DRM_COMMAND_BASE + DRM_XE_OBSERVATION, struct drm_xe_observation_param) #define DRM_IOCTL_XE_MADVISE DRM_IOW(DRM_COMMAND_BASE + DRM_XE_MADVISE, struct drm_xe_madvise) #define DRM_IOCTL_XE_VM_QUERY_MEM_RANGE_ATTRS DRM_IOWR(DRM_COMMAND_BASE + DRM_XE_VM_QUERY_MEM_RANGE_ATTRS, struct drm_xe_vm_query_mem_range_attr) /** * DOC: Xe IOCTL Extensions * * Before detailing the IOCTLs and its structs, it is important to highlight * that every IOCTL in Xe is extensible. * * Many interfaces need to grow over time. In most cases we can simply * extend the struct and have userspace pass in more data. Another option, * as demonstrated by Vulkan's approach to providing extensions for forward * and backward compatibility, is to use a list of optional structs to * provide those extra details. * * The key advantage to using an extension chain is that it allows us to * redefine the interface more easily than an ever growing struct of * increasing complexity, and for large parts of that interface to be * entirely optional. The downside is more pointer chasing; chasing across * the boundary with pointers encapsulated inside u64. * * Example chaining: * * .. code-block:: C * * struct drm_xe_user_extension ext3 { * .next_extension = 0, // end * .name = ..., * }; * struct drm_xe_user_extension ext2 { * .next_extension = (uintptr_t)&ext3, * .name = ..., * }; * struct drm_xe_user_extension ext1 { * .next_extension = (uintptr_t)&ext2, * .name = ..., * }; * * Typically the struct drm_xe_user_extension would be embedded in some uAPI * struct, and in this case we would feed it the head of the chain(i.e ext1), * which would then apply all of the above extensions. */ /** * struct drm_xe_user_extension - Base class for defining a chain of extensions */ struct drm_xe_user_extension { /** * @next_extension: * * Pointer to the next struct drm_xe_user_extension, or zero if the end. */ __u64 next_extension; /** * @name: Name of the extension. * * Note that the name here is just some integer. * * Also note that the name space for this is not global for the whole * driver, but rather its scope/meaning is limited to the specific piece * of uAPI which has embedded the struct drm_xe_user_extension. */ __u32 name; /** * @pad: MBZ * * All undefined bits must be zero. */ __u32 pad; }; /** * struct drm_xe_ext_set_property - Generic set property extension * * A generic struct that allows any of the Xe's IOCTL to be extended * with a set_property operation. */ struct drm_xe_ext_set_property { /** @base: base user extension */ struct drm_xe_user_extension base; /** @property: property to set */ __u32 property; /** @pad: MBZ */ __u32 pad; /** @value: property value */ __u64 value; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_engine_class_instance - instance of an engine class * * It is returned as part of the @drm_xe_engine, but it also is used as * the input of engine selection for both @drm_xe_exec_queue_create and * @drm_xe_query_engine_cycles * * The @engine_class can be: * - %DRM_XE_ENGINE_CLASS_RENDER * - %DRM_XE_ENGINE_CLASS_COPY * - %DRM_XE_ENGINE_CLASS_VIDEO_DECODE * - %DRM_XE_ENGINE_CLASS_VIDEO_ENHANCE * - %DRM_XE_ENGINE_CLASS_COMPUTE * - %DRM_XE_ENGINE_CLASS_VM_BIND - Kernel only classes (not actual * hardware engine class). Used for creating ordered queues of VM * bind operations. */ struct drm_xe_engine_class_instance { #define DRM_XE_ENGINE_CLASS_RENDER 0 #define DRM_XE_ENGINE_CLASS_COPY 1 #define DRM_XE_ENGINE_CLASS_VIDEO_DECODE 2 #define DRM_XE_ENGINE_CLASS_VIDEO_ENHANCE 3 #define DRM_XE_ENGINE_CLASS_COMPUTE 4 #define DRM_XE_ENGINE_CLASS_VM_BIND 5 /** @engine_class: engine class id */ __u16 engine_class; /** @engine_instance: engine instance id */ __u16 engine_instance; /** @gt_id: Unique ID of this GT within the PCI Device */ __u16 gt_id; /** @pad: MBZ */ __u16 pad; }; /** * struct drm_xe_engine - describe hardware engine */ struct drm_xe_engine { /** @instance: The @drm_xe_engine_class_instance */ struct drm_xe_engine_class_instance instance; /** @reserved: Reserved */ __u64 reserved[3]; }; /** * struct drm_xe_query_engines - describe engines * * If a query is made with a struct @drm_xe_device_query where .query * is equal to %DRM_XE_DEVICE_QUERY_ENGINES, then the reply uses an array of * struct @drm_xe_query_engines in .data. */ struct drm_xe_query_engines { /** @num_engines: number of engines returned in @engines */ __u32 num_engines; /** @pad: MBZ */ __u32 pad; /** @engines: The returned engines for this device */ struct drm_xe_engine engines[]; }; /** * enum drm_xe_memory_class - Supported memory classes. */ enum drm_xe_memory_class { /** @DRM_XE_MEM_REGION_CLASS_SYSMEM: Represents system memory. */ DRM_XE_MEM_REGION_CLASS_SYSMEM = 0, /** * @DRM_XE_MEM_REGION_CLASS_VRAM: On discrete platforms, this * represents the memory that is local to the device, which we * call VRAM. Not valid on integrated platforms. */ DRM_XE_MEM_REGION_CLASS_VRAM }; /** * struct drm_xe_mem_region - Describes some region as known to * the driver. */ struct drm_xe_mem_region { /** * @mem_class: The memory class describing this region. * * See enum drm_xe_memory_class for supported values. */ __u16 mem_class; /** * @instance: The unique ID for this region, which serves as the * index in the placement bitmask used as argument for * &DRM_IOCTL_XE_GEM_CREATE */ __u16 instance; /** * @min_page_size: Min page-size in bytes for this region. * * When the kernel allocates memory for this region, the * underlying pages will be at least @min_page_size in size. * Buffer objects with an allowable placement in this region must be * created with a size aligned to this value. * GPU virtual address mappings of (parts of) buffer objects that * may be placed in this region must also have their GPU virtual * address and range aligned to this value. * Affected IOCTLS will return %-EINVAL if alignment restrictions are * not met. */ __u32 min_page_size; /** * @total_size: The usable size in bytes for this region. */ __u64 total_size; /** * @used: Estimate of the memory used in bytes for this region. * * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable * accounting. Without this the value here will always equal * zero. */ __u64 used; /** * @cpu_visible_size: How much of this region can be CPU * accessed, in bytes. * * This will always be <= @total_size, and the remainder (if * any) will not be CPU accessible. If the CPU accessible part * is smaller than @total_size then this is referred to as a * small BAR system. * * On systems without small BAR (full BAR), the probed_size will * always equal the @total_size, since all of it will be CPU * accessible. * * Note this is only tracked for DRM_XE_MEM_REGION_CLASS_VRAM * regions (for other types the value here will always equal * zero). */ __u64 cpu_visible_size; /** * @cpu_visible_used: Estimate of CPU visible memory used, in * bytes. * * Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable * accounting. Without this the value here will always equal * zero. Note this is only currently tracked for * DRM_XE_MEM_REGION_CLASS_VRAM regions (for other types the value * here will always be zero). */ __u64 cpu_visible_used; /** @reserved: Reserved */ __u64 reserved[6]; }; /** * struct drm_xe_query_mem_regions - describe memory regions * * If a query is made with a struct drm_xe_device_query where .query * is equal to DRM_XE_DEVICE_QUERY_MEM_REGIONS, then the reply uses * struct drm_xe_query_mem_regions in .data. */ struct drm_xe_query_mem_regions { /** @num_mem_regions: number of memory regions returned in @mem_regions */ __u32 num_mem_regions; /** @pad: MBZ */ __u32 pad; /** @mem_regions: The returned memory regions for this device */ struct drm_xe_mem_region mem_regions[]; }; /** * struct drm_xe_query_config - describe the device configuration * * If a query is made with a struct drm_xe_device_query where .query * is equal to DRM_XE_DEVICE_QUERY_CONFIG, then the reply uses * struct drm_xe_query_config in .data. * * The index in @info can be: * - %DRM_XE_QUERY_CONFIG_REV_AND_DEVICE_ID - Device ID (lower 16 bits) * and the device revision (next 8 bits) * - %DRM_XE_QUERY_CONFIG_FLAGS - Flags describing the device * configuration, see list below * * - %DRM_XE_QUERY_CONFIG_FLAG_HAS_VRAM - Flag is set if the device * has usable VRAM * - %DRM_XE_QUERY_CONFIG_FLAG_HAS_LOW_LATENCY - Flag is set if the device * has low latency hint support * - %DRM_XE_QUERY_CONFIG_FLAG_HAS_CPU_ADDR_MIRROR - Flag is set if the * device has CPU address mirroring support * - %DRM_XE_QUERY_CONFIG_MIN_ALIGNMENT - Minimal memory alignment * required by this device, typically SZ_4K or SZ_64K * - %DRM_XE_QUERY_CONFIG_VA_BITS - Maximum bits of a virtual address * - %DRM_XE_QUERY_CONFIG_MAX_EXEC_QUEUE_PRIORITY - Value of the highest * available exec queue priority */ struct drm_xe_query_config { /** @num_params: number of parameters returned in info */ __u32 num_params; /** @pad: MBZ */ __u32 pad; #define DRM_XE_QUERY_CONFIG_REV_AND_DEVICE_ID 0 #define DRM_XE_QUERY_CONFIG_FLAGS 1 #define DRM_XE_QUERY_CONFIG_FLAG_HAS_VRAM (1 << 0) #define DRM_XE_QUERY_CONFIG_FLAG_HAS_LOW_LATENCY (1 << 1) #define DRM_XE_QUERY_CONFIG_FLAG_HAS_CPU_ADDR_MIRROR (1 << 2) #define DRM_XE_QUERY_CONFIG_MIN_ALIGNMENT 2 #define DRM_XE_QUERY_CONFIG_VA_BITS 3 #define DRM_XE_QUERY_CONFIG_MAX_EXEC_QUEUE_PRIORITY 4 /** @info: array of elements containing the config info */ __u64 info[]; }; /** * struct drm_xe_gt - describe an individual GT. * * To be used with drm_xe_query_gt_list, which will return a list with all the * existing GT individual descriptions. * Graphics Technology (GT) is a subset of a GPU/tile that is responsible for * implementing graphics and/or media operations. * * The index in @type can be: * - %DRM_XE_QUERY_GT_TYPE_MAIN * - %DRM_XE_QUERY_GT_TYPE_MEDIA */ struct drm_xe_gt { #define DRM_XE_QUERY_GT_TYPE_MAIN 0 #define DRM_XE_QUERY_GT_TYPE_MEDIA 1 /** @type: GT type: Main or Media */ __u16 type; /** @tile_id: Tile ID where this GT lives (Information only) */ __u16 tile_id; /** @gt_id: Unique ID of this GT within the PCI Device */ __u16 gt_id; /** @pad: MBZ */ __u16 pad[3]; /** @reference_clock: A clock frequency for timestamp */ __u32 reference_clock; /** * @near_mem_regions: Bit mask of instances from * drm_xe_query_mem_regions that are nearest to the current engines * of this GT. * Each index in this mask refers directly to the struct * drm_xe_query_mem_regions' instance, no assumptions should * be made about order. The type of each region is described * by struct drm_xe_query_mem_regions' mem_class. */ __u64 near_mem_regions; /** * @far_mem_regions: Bit mask of instances from * drm_xe_query_mem_regions that are far from the engines of this GT. * In general, they have extra indirections when compared to the * @near_mem_regions. For a discrete device this could mean system * memory and memory living in a different tile. * Each index in this mask refers directly to the struct * drm_xe_query_mem_regions' instance, no assumptions should * be made about order. The type of each region is described * by struct drm_xe_query_mem_regions' mem_class. */ __u64 far_mem_regions; /** @ip_ver_major: Graphics/media IP major version on GMD_ID platforms */ __u16 ip_ver_major; /** @ip_ver_minor: Graphics/media IP minor version on GMD_ID platforms */ __u16 ip_ver_minor; /** @ip_ver_rev: Graphics/media IP revision version on GMD_ID platforms */ __u16 ip_ver_rev; /** @pad2: MBZ */ __u16 pad2; /** @reserved: Reserved */ __u64 reserved[7]; }; /** * struct drm_xe_query_gt_list - A list with GT description items. * * If a query is made with a struct drm_xe_device_query where .query * is equal to DRM_XE_DEVICE_QUERY_GT_LIST, then the reply uses struct * drm_xe_query_gt_list in .data. */ struct drm_xe_query_gt_list { /** @num_gt: number of GT items returned in gt_list */ __u32 num_gt; /** @pad: MBZ */ __u32 pad; /** @gt_list: The GT list returned for this device */ struct drm_xe_gt gt_list[]; }; /** * struct drm_xe_query_topology_mask - describe the topology mask of a GT * * This is the hardware topology which reflects the internal physical * structure of the GPU. * * If a query is made with a struct drm_xe_device_query where .query * is equal to DRM_XE_DEVICE_QUERY_GT_TOPOLOGY, then the reply uses * struct drm_xe_query_topology_mask in .data. * * The @type can be: * - %DRM_XE_TOPO_DSS_GEOMETRY - To query the mask of Dual Sub Slices * (DSS) available for geometry operations. For example a query response * containing the following in mask: * ``DSS_GEOMETRY ff ff ff ff 00 00 00 00`` * means 32 DSS are available for geometry. * - %DRM_XE_TOPO_DSS_COMPUTE - To query the mask of Dual Sub Slices * (DSS) available for compute operations. For example a query response * containing the following in mask: * ``DSS_COMPUTE ff ff ff ff 00 00 00 00`` * means 32 DSS are available for compute. * - %DRM_XE_TOPO_L3_BANK - To query the mask of enabled L3 banks. This type * may be omitted if the driver is unable to query the mask from the * hardware. * - %DRM_XE_TOPO_EU_PER_DSS - To query the mask of Execution Units (EU) * available per Dual Sub Slices (DSS). For example a query response * containing the following in mask: * ``EU_PER_DSS ff ff 00 00 00 00 00 00`` * means each DSS has 16 SIMD8 EUs. This type may be omitted if device * doesn't have SIMD8 EUs. * - %DRM_XE_TOPO_SIMD16_EU_PER_DSS - To query the mask of SIMD16 Execution * Units (EU) available per Dual Sub Slices (DSS). For example a query * response containing the following in mask: * ``SIMD16_EU_PER_DSS ff ff 00 00 00 00 00 00`` * means each DSS has 16 SIMD16 EUs. This type may be omitted if device * doesn't have SIMD16 EUs. */ struct drm_xe_query_topology_mask { /** @gt_id: GT ID the mask is associated with */ __u16 gt_id; #define DRM_XE_TOPO_DSS_GEOMETRY 1 #define DRM_XE_TOPO_DSS_COMPUTE 2 #define DRM_XE_TOPO_L3_BANK 3 #define DRM_XE_TOPO_EU_PER_DSS 4 #define DRM_XE_TOPO_SIMD16_EU_PER_DSS 5 /** @type: type of mask */ __u16 type; /** @num_bytes: number of bytes in requested mask */ __u32 num_bytes; /** @mask: little-endian mask of @num_bytes */ __u8 mask[]; }; /** * struct drm_xe_query_engine_cycles - correlate CPU and GPU timestamps * * If a query is made with a struct drm_xe_device_query where .query is equal to * DRM_XE_DEVICE_QUERY_ENGINE_CYCLES, then the reply uses struct drm_xe_query_engine_cycles * in .data. struct drm_xe_query_engine_cycles is allocated by the user and * .data points to this allocated structure. * * The query returns the engine cycles, which along with GT's @reference_clock, * can be used to calculate the engine timestamp. In addition the * query returns a set of cpu timestamps that indicate when the command * streamer cycle count was captured. */ struct drm_xe_query_engine_cycles { /** * @eci: This is input by the user and is the engine for which command * streamer cycles is queried. */ struct drm_xe_engine_class_instance eci; /** * @clockid: This is input by the user and is the reference clock id for * CPU timestamp. For definition, see clock_gettime(2) and * perf_event_open(2). Supported clock ids are CLOCK_MONOTONIC, * CLOCK_MONOTONIC_RAW, CLOCK_REALTIME, CLOCK_BOOTTIME, CLOCK_TAI. */ __s32 clockid; /** @width: Width of the engine cycle counter in bits. */ __u32 width; /** * @engine_cycles: Engine cycles as read from its register * at 0x358 offset. */ __u64 engine_cycles; /** * @cpu_timestamp: CPU timestamp in ns. The timestamp is captured before * reading the engine_cycles register using the reference clockid set by the * user. */ __u64 cpu_timestamp; /** * @cpu_delta: Time delta in ns captured around reading the lower dword * of the engine_cycles register. */ __u64 cpu_delta; }; /** * struct drm_xe_query_uc_fw_version - query a micro-controller firmware version * * Given a uc_type this will return the branch, major, minor and patch version * of the micro-controller firmware. */ struct drm_xe_query_uc_fw_version { /** @uc_type: The micro-controller type to query firmware version */ #define XE_QUERY_UC_TYPE_GUC_SUBMISSION 0 #define XE_QUERY_UC_TYPE_HUC 1 __u16 uc_type; /** @pad: MBZ */ __u16 pad; /** @branch_ver: branch uc fw version */ __u32 branch_ver; /** @major_ver: major uc fw version */ __u32 major_ver; /** @minor_ver: minor uc fw version */ __u32 minor_ver; /** @patch_ver: patch uc fw version */ __u32 patch_ver; /** @pad2: MBZ */ __u32 pad2; /** @reserved: Reserved */ __u64 reserved; }; /** * struct drm_xe_query_pxp_status - query if PXP is ready * * If PXP is enabled and no fatal error has occurred, the status will be set to * one of the following values: * 0: PXP init still in progress * 1: PXP init complete * * If PXP is not enabled or something has gone wrong, the query will be failed * with one of the following error codes: * -ENODEV: PXP not supported or disabled; * -EIO: fatal error occurred during init, so PXP will never be enabled; * -EINVAL: incorrect value provided as part of the query; * -EFAULT: error copying the memory between kernel and userspace. * * The status can only be 0 in the first few seconds after driver load. If * everything works as expected, the status will transition to init complete in * less than 1 second, while in case of errors the driver might take longer to * start returning an error code, but it should still take less than 10 seconds. * * The supported session type bitmask is based on the values in * enum drm_xe_pxp_session_type. TYPE_NONE is always supported and therefore * is not reported in the bitmask. * */ struct drm_xe_query_pxp_status { /** @status: current PXP status */ __u32 status; /** @supported_session_types: bitmask of supported PXP session types */ __u32 supported_session_types; }; /** * struct drm_xe_device_query - Input of &DRM_IOCTL_XE_DEVICE_QUERY - main * structure to query device information * * The user selects the type of data to query among DRM_XE_DEVICE_QUERY_* * and sets the value in the query member. This determines the type of * the structure provided by the driver in data, among struct drm_xe_query_*. * * The @query can be: * - %DRM_XE_DEVICE_QUERY_ENGINES * - %DRM_XE_DEVICE_QUERY_MEM_REGIONS * - %DRM_XE_DEVICE_QUERY_CONFIG * - %DRM_XE_DEVICE_QUERY_GT_LIST * - %DRM_XE_DEVICE_QUERY_HWCONFIG - Query type to retrieve the hardware * configuration of the device such as information on slices, memory, * caches, and so on. It is provided as a table of key / value * attributes. * - %DRM_XE_DEVICE_QUERY_GT_TOPOLOGY * - %DRM_XE_DEVICE_QUERY_ENGINE_CYCLES * - %DRM_XE_DEVICE_QUERY_PXP_STATUS * * If size is set to 0, the driver fills it with the required size for * the requested type of data to query. If size is equal to the required * size, the queried information is copied into data. If size is set to * a value different from 0 and different from the required size, the * IOCTL call returns -EINVAL. * * For example the following code snippet allows retrieving and printing * information about the device engines with DRM_XE_DEVICE_QUERY_ENGINES: * * .. code-block:: C * * struct drm_xe_query_engines *engines; * struct drm_xe_device_query query = { * .extensions = 0, * .query = DRM_XE_DEVICE_QUERY_ENGINES, * .size = 0, * .data = 0, * }; * ioctl(fd, DRM_IOCTL_XE_DEVICE_QUERY, &query); * engines = malloc(query.size); * query.data = (uintptr_t)engines; * ioctl(fd, DRM_IOCTL_XE_DEVICE_QUERY, &query); * for (int i = 0; i < engines->num_engines; i++) { * printf("Engine %d: %s\n", i, * engines->engines[i].instance.engine_class == * DRM_XE_ENGINE_CLASS_RENDER ? "RENDER": * engines->engines[i].instance.engine_class == * DRM_XE_ENGINE_CLASS_COPY ? "COPY": * engines->engines[i].instance.engine_class == * DRM_XE_ENGINE_CLASS_VIDEO_DECODE ? "VIDEO_DECODE": * engines->engines[i].instance.engine_class == * DRM_XE_ENGINE_CLASS_VIDEO_ENHANCE ? "VIDEO_ENHANCE": * engines->engines[i].instance.engine_class == * DRM_XE_ENGINE_CLASS_COMPUTE ? "COMPUTE": * "UNKNOWN"); * } * free(engines); */ struct drm_xe_device_query { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; #define DRM_XE_DEVICE_QUERY_ENGINES 0 #define DRM_XE_DEVICE_QUERY_MEM_REGIONS 1 #define DRM_XE_DEVICE_QUERY_CONFIG 2 #define DRM_XE_DEVICE_QUERY_GT_LIST 3 #define DRM_XE_DEVICE_QUERY_HWCONFIG 4 #define DRM_XE_DEVICE_QUERY_GT_TOPOLOGY 5 #define DRM_XE_DEVICE_QUERY_ENGINE_CYCLES 6 #define DRM_XE_DEVICE_QUERY_UC_FW_VERSION 7 #define DRM_XE_DEVICE_QUERY_OA_UNITS 8 #define DRM_XE_DEVICE_QUERY_PXP_STATUS 9 #define DRM_XE_DEVICE_QUERY_EU_STALL 10 /** @query: The type of data to query */ __u32 query; /** @size: Size of the queried data */ __u32 size; /** @data: Queried data is placed here */ __u64 data; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_gem_create - Input of &DRM_IOCTL_XE_GEM_CREATE - A structure for * gem creation * * The @flags can be: * - %DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING - Modify the GEM object * allocation strategy by deferring physical memory allocation * until the object is either bound to a virtual memory region via * VM_BIND or accessed by the CPU. As a result, no backing memory is * reserved at the time of GEM object creation. * - %DRM_XE_GEM_CREATE_FLAG_SCANOUT * - %DRM_XE_GEM_CREATE_FLAG_NEEDS_VISIBLE_VRAM - When using VRAM as a * possible placement, ensure that the corresponding VRAM allocation * will always use the CPU accessible part of VRAM. This is important * for small-bar systems (on full-bar systems this gets turned into a * noop). * Note1: System memory can be used as an extra placement if the kernel * should spill the allocation to system memory, if space can't be made * available in the CPU accessible part of VRAM (giving the same * behaviour as the i915 interface, see * I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS). * Note2: For clear-color CCS surfaces the kernel needs to read the * clear-color value stored in the buffer, and on discrete platforms we * need to use VRAM for display surfaces, therefore the kernel requires * setting this flag for such objects, otherwise an error is thrown on * small-bar systems. * * @cpu_caching supports the following values: * - %DRM_XE_GEM_CPU_CACHING_WB - Allocate the pages with write-back * caching. On iGPU this can't be used for scanout surfaces. Currently * not allowed for objects placed in VRAM. * - %DRM_XE_GEM_CPU_CACHING_WC - Allocate the pages as write-combined. This * is uncached. Scanout surfaces should likely use this. All objects * that can be placed in VRAM must use this. * * This ioctl supports setting the following properties via the * %DRM_XE_GEM_CREATE_EXTENSION_SET_PROPERTY extension, which uses the * generic @drm_xe_ext_set_property struct: * * - %DRM_XE_GEM_CREATE_SET_PROPERTY_PXP_TYPE - set the type of PXP session * this object will be used with. Valid values are listed in enum * drm_xe_pxp_session_type. %DRM_XE_PXP_TYPE_NONE is the default behavior, so * there is no need to explicitly set that. Objects used with session of type * %DRM_XE_PXP_TYPE_HWDRM will be marked as invalid if a PXP invalidation * event occurs after their creation. Attempting to flip an invalid object * will cause a black frame to be displayed instead. Submissions with invalid * objects mapped in the VM will be rejected. */ struct drm_xe_gem_create { #define DRM_XE_GEM_CREATE_EXTENSION_SET_PROPERTY 0 #define DRM_XE_GEM_CREATE_SET_PROPERTY_PXP_TYPE 0 /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** * @size: Size of the object to be created, must match region * (system or vram) minimum alignment (&min_page_size). */ __u64 size; /** * @placement: A mask of memory instances of where BO can be placed. * Each index in this mask refers directly to the struct * drm_xe_query_mem_regions' instance, no assumptions should * be made about order. The type of each region is described * by struct drm_xe_query_mem_regions' mem_class. */ __u32 placement; #define DRM_XE_GEM_CREATE_FLAG_DEFER_BACKING (1 << 0) #define DRM_XE_GEM_CREATE_FLAG_SCANOUT (1 << 1) #define DRM_XE_GEM_CREATE_FLAG_NEEDS_VISIBLE_VRAM (1 << 2) /** * @flags: Flags, currently a mask of memory instances of where BO can * be placed */ __u32 flags; /** * @vm_id: Attached VM, if any * * If a VM is specified, this BO must: * * 1. Only ever be bound to that VM. * 2. Cannot be exported as a PRIME fd. */ __u32 vm_id; /** * @handle: Returned handle for the object. * * Object handles are nonzero. */ __u32 handle; #define DRM_XE_GEM_CPU_CACHING_WB 1 #define DRM_XE_GEM_CPU_CACHING_WC 2 /** * @cpu_caching: The CPU caching mode to select for this object. If * mmaping the object the mode selected here will also be used. The * exception is when mapping system memory (including data evicted * to system) on discrete GPUs. The caching mode selected will * then be overridden to DRM_XE_GEM_CPU_CACHING_WB, and coherency * between GPU- and CPU is guaranteed. The caching mode of * existing CPU-mappings will be updated transparently to * user-space clients. */ __u16 cpu_caching; /** @pad: MBZ */ __u16 pad[3]; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_gem_mmap_offset - Input of &DRM_IOCTL_XE_GEM_MMAP_OFFSET * * The @flags can be: * - %DRM_XE_MMAP_OFFSET_FLAG_PCI_BARRIER - For user to query special offset * for use in mmap ioctl. Writing to the returned mmap address will generate a * PCI memory barrier with low overhead (avoiding IOCTL call as well as writing * to VRAM which would also add overhead), acting like an MI_MEM_FENCE * instruction. * * Note: The mmap size can be at most 4K, due to HW limitations. As a result * this interface is only supported on CPU architectures that support 4K page * size. The mmap_offset ioctl will detect this and gracefully return an * error, where userspace is expected to have a different fallback method for * triggering a barrier. * * Roughly the usage would be as follows: * * .. code-block:: C * * struct drm_xe_gem_mmap_offset mmo = { * .handle = 0, // must be set to 0 * .flags = DRM_XE_MMAP_OFFSET_FLAG_PCI_BARRIER, * }; * * err = ioctl(fd, DRM_IOCTL_XE_GEM_MMAP_OFFSET, &mmo); * map = mmap(NULL, size, PROT_WRITE, MAP_SHARED, fd, mmo.offset); * map[i] = 0xdeadbeaf; // issue barrier */ struct drm_xe_gem_mmap_offset { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @handle: Handle for the object being mapped. */ __u32 handle; #define DRM_XE_MMAP_OFFSET_FLAG_PCI_BARRIER (1 << 0) /** @flags: Flags */ __u32 flags; /** @offset: The fake offset to use for subsequent mmap call */ __u64 offset; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_vm_create - Input of &DRM_IOCTL_XE_VM_CREATE * * The @flags can be: * - %DRM_XE_VM_CREATE_FLAG_SCRATCH_PAGE - Map the whole virtual address * space of the VM to scratch page. A vm_bind would overwrite the scratch * page mapping. This flag is mutually exclusive with the * %DRM_XE_VM_CREATE_FLAG_FAULT_MODE flag, with an exception of on x2 and * xe3 platform. * - %DRM_XE_VM_CREATE_FLAG_LR_MODE - An LR, or Long Running VM accepts * exec submissions to its exec_queues that don't have an upper time * limit on the job execution time. But exec submissions to these * don't allow any of the sync types DRM_XE_SYNC_TYPE_SYNCOBJ, * DRM_XE_SYNC_TYPE_TIMELINE_SYNCOBJ, used as out-syncobjs, that is, * together with sync flag DRM_XE_SYNC_FLAG_SIGNAL. * LR VMs can be created in recoverable page-fault mode using * DRM_XE_VM_CREATE_FLAG_FAULT_MODE, if the device supports it. * If that flag is omitted, the UMD can not rely on the slightly * different per-VM overcommit semantics that are enabled by * DRM_XE_VM_CREATE_FLAG_FAULT_MODE (see below), but KMD may * still enable recoverable pagefaults if supported by the device. * - %DRM_XE_VM_CREATE_FLAG_FAULT_MODE - Requires also * DRM_XE_VM_CREATE_FLAG_LR_MODE. It allows memory to be allocated on * demand when accessed, and also allows per-VM overcommit of memory. * The xe driver internally uses recoverable pagefaults to implement * this. */ struct drm_xe_vm_create { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; #define DRM_XE_VM_CREATE_FLAG_SCRATCH_PAGE (1 << 0) #define DRM_XE_VM_CREATE_FLAG_LR_MODE (1 << 1) #define DRM_XE_VM_CREATE_FLAG_FAULT_MODE (1 << 2) /** @flags: Flags */ __u32 flags; /** @vm_id: Returned VM ID */ __u32 vm_id; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_vm_destroy - Input of &DRM_IOCTL_XE_VM_DESTROY */ struct drm_xe_vm_destroy { /** @vm_id: VM ID */ __u32 vm_id; /** @pad: MBZ */ __u32 pad; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_vm_bind_op - run bind operations * * The @op can be: * - %DRM_XE_VM_BIND_OP_MAP * - %DRM_XE_VM_BIND_OP_UNMAP * - %DRM_XE_VM_BIND_OP_MAP_USERPTR * - %DRM_XE_VM_BIND_OP_UNMAP_ALL * - %DRM_XE_VM_BIND_OP_PREFETCH * * and the @flags can be: * - %DRM_XE_VM_BIND_FLAG_READONLY - Setup the page tables as read-only * to ensure write protection * - %DRM_XE_VM_BIND_FLAG_IMMEDIATE - On a faulting VM, do the * MAP operation immediately rather than deferring the MAP to the page * fault handler. This is implied on a non-faulting VM as there is no * fault handler to defer to. * - %DRM_XE_VM_BIND_FLAG_NULL - When the NULL flag is set, the page * tables are setup with a special bit which indicates writes are * dropped and all reads return zero. In the future, the NULL flags * will only be valid for DRM_XE_VM_BIND_OP_MAP operations, the BO * handle MBZ, and the BO offset MBZ. This flag is intended to * implement VK sparse bindings. * - %DRM_XE_VM_BIND_FLAG_CHECK_PXP - If the object is encrypted via PXP, * reject the binding if the encryption key is no longer valid. This * flag has no effect on BOs that are not marked as using PXP. * - %DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR - When the CPU address mirror flag is * set, no mappings are created rather the range is reserved for CPU address * mirroring which will be populated on GPU page faults or prefetches. Only * valid on VMs with DRM_XE_VM_CREATE_FLAG_FAULT_MODE set. The CPU address * mirror flag are only valid for DRM_XE_VM_BIND_OP_MAP operations, the BO * handle MBZ, and the BO offset MBZ. * - %DRM_XE_VM_BIND_FLAG_MADVISE_AUTORESET - Can be used in combination with * %DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR to reset madvises when the underlying * CPU address space range is unmapped (typically with munmap(2) or brk(2)). * The madvise values set with &DRM_IOCTL_XE_MADVISE are reset to the values * that were present immediately after the &DRM_IOCTL_XE_VM_BIND. * The reset GPU virtual address range is the intersection of the range bound * using &DRM_IOCTL_XE_VM_BIND and the virtual CPU address space range * unmapped. * This functionality is present to mimic the behaviour of CPU address space * madvises set using madvise(2), which are typically reset on unmap. * Note: free(3) may or may not call munmap(2) and/or brk(2), and may thus * not invoke autoreset. Neither will stack variables going out of scope. * Therefore it's recommended to always explicitly reset the madvises when * freeing the memory backing a region used in a &DRM_IOCTL_XE_MADVISE call. * * The @prefetch_mem_region_instance for %DRM_XE_VM_BIND_OP_PREFETCH can also be: * - %DRM_XE_CONSULT_MEM_ADVISE_PREF_LOC, which ensures prefetching occurs in * the memory region advised by madvise. */ struct drm_xe_vm_bind_op { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** * @obj: GEM object to operate on, MBZ for MAP_USERPTR, MBZ for UNMAP */ __u32 obj; /** * @pat_index: The platform defined @pat_index to use for this mapping. * The index basically maps to some predefined memory attributes, * including things like caching, coherency, compression etc. The exact * meaning of the pat_index is platform specific and defined in the * Bspec and PRMs. When the KMD sets up the binding the index here is * encoded into the ppGTT PTE. * * For coherency the @pat_index needs to be at least 1way coherent when * drm_xe_gem_create.cpu_caching is DRM_XE_GEM_CPU_CACHING_WB. The KMD * will extract the coherency mode from the @pat_index and reject if * there is a mismatch (see note below for pre-MTL platforms). * * Note: On pre-MTL platforms there is only a caching mode and no * explicit coherency mode, but on such hardware there is always a * shared-LLC (or is dgpu) so all GT memory accesses are coherent with * CPU caches even with the caching mode set as uncached. It's only the * display engine that is incoherent (on dgpu it must be in VRAM which * is always mapped as WC on the CPU). However to keep the uapi somewhat * consistent with newer platforms the KMD groups the different cache * levels into the following coherency buckets on all pre-MTL platforms: * * ppGTT UC -> COH_NONE * ppGTT WC -> COH_NONE * ppGTT WT -> COH_NONE * ppGTT WB -> COH_AT_LEAST_1WAY * * In practice UC/WC/WT should only ever used for scanout surfaces on * such platforms (or perhaps in general for dma-buf if shared with * another device) since it is only the display engine that is actually * incoherent. Everything else should typically use WB given that we * have a shared-LLC. On MTL+ this completely changes and the HW * defines the coherency mode as part of the @pat_index, where * incoherent GT access is possible. * * Note: For userptr and externally imported dma-buf the kernel expects * either 1WAY or 2WAY for the @pat_index. * * For DRM_XE_VM_BIND_FLAG_NULL bindings there are no KMD restrictions * on the @pat_index. For such mappings there is no actual memory being * mapped (the address in the PTE is invalid), so the various PAT memory * attributes likely do not apply. Simply leaving as zero is one * option (still a valid pat_index). Same applies to * DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR bindings as for such mapping * there is no actual memory being mapped. */ __u16 pat_index; /** @pad: MBZ */ __u16 pad; union { /** * @obj_offset: Offset into the object, MBZ for CLEAR_RANGE, * ignored for unbind */ __u64 obj_offset; /** @userptr: user pointer to bind on */ __u64 userptr; /** * @cpu_addr_mirror_offset: Offset from GPU @addr to create * CPU address mirror mappings. MBZ with current level of * support (e.g. 1 to 1 mapping between GPU and CPU mappings * only supported). */ __s64 cpu_addr_mirror_offset; }; /** * @range: Number of bytes from the object to bind to addr, MBZ for UNMAP_ALL */ __u64 range; /** @addr: Address to operate on, MBZ for UNMAP_ALL */ __u64 addr; #define DRM_XE_VM_BIND_OP_MAP 0x0 #define DRM_XE_VM_BIND_OP_UNMAP 0x1 #define DRM_XE_VM_BIND_OP_MAP_USERPTR 0x2 #define DRM_XE_VM_BIND_OP_UNMAP_ALL 0x3 #define DRM_XE_VM_BIND_OP_PREFETCH 0x4 /** @op: Bind operation to perform */ __u32 op; #define DRM_XE_VM_BIND_FLAG_READONLY (1 << 0) #define DRM_XE_VM_BIND_FLAG_IMMEDIATE (1 << 1) #define DRM_XE_VM_BIND_FLAG_NULL (1 << 2) #define DRM_XE_VM_BIND_FLAG_DUMPABLE (1 << 3) #define DRM_XE_VM_BIND_FLAG_CHECK_PXP (1 << 4) #define DRM_XE_VM_BIND_FLAG_CPU_ADDR_MIRROR (1 << 5) #define DRM_XE_VM_BIND_FLAG_MADVISE_AUTORESET (1 << 6) /** @flags: Bind flags */ __u32 flags; #define DRM_XE_CONSULT_MEM_ADVISE_PREF_LOC -1 /** * @prefetch_mem_region_instance: Memory region to prefetch VMA to. * It is a region instance, not a mask. * To be used only with %DRM_XE_VM_BIND_OP_PREFETCH operation. */ __u32 prefetch_mem_region_instance; /** @pad2: MBZ */ __u32 pad2; /** @reserved: Reserved */ __u64 reserved[3]; }; /** * struct drm_xe_vm_bind - Input of &DRM_IOCTL_XE_VM_BIND * * Below is an example of a minimal use of @drm_xe_vm_bind to * asynchronously bind the buffer `data` at address `BIND_ADDRESS` to * illustrate `userptr`. It can be synchronized by using the example * provided for @drm_xe_sync. * * .. code-block:: C * * data = aligned_alloc(ALIGNMENT, BO_SIZE); * struct drm_xe_vm_bind bind = { * .vm_id = vm, * .num_binds = 1, * .bind.obj = 0, * .bind.obj_offset = to_user_pointer(data), * .bind.range = BO_SIZE, * .bind.addr = BIND_ADDRESS, * .bind.op = DRM_XE_VM_BIND_OP_MAP_USERPTR, * .bind.flags = 0, * .num_syncs = 1, * .syncs = &sync, * .exec_queue_id = 0, * }; * ioctl(fd, DRM_IOCTL_XE_VM_BIND, &bind); * */ struct drm_xe_vm_bind { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @vm_id: The ID of the VM to bind to */ __u32 vm_id; /** * @exec_queue_id: exec_queue_id, must be of class DRM_XE_ENGINE_CLASS_VM_BIND * and exec queue must have same vm_id. If zero, the default VM bind engine * is used. */ __u32 exec_queue_id; /** @pad: MBZ */ __u32 pad; /** @num_binds: number of binds in this IOCTL */ __u32 num_binds; union { /** @bind: used if num_binds == 1 */ struct drm_xe_vm_bind_op bind; /** * @vector_of_binds: userptr to array of struct * drm_xe_vm_bind_op if num_binds > 1 */ __u64 vector_of_binds; }; /** @pad2: MBZ */ __u32 pad2; /** @num_syncs: amount of syncs to wait on */ __u32 num_syncs; /** @syncs: pointer to struct drm_xe_sync array */ __u64 syncs; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_exec_queue_create - Input of &DRM_IOCTL_XE_EXEC_QUEUE_CREATE * * This ioctl supports setting the following properties via the * %DRM_XE_EXEC_QUEUE_EXTENSION_SET_PROPERTY extension, which uses the * generic @drm_xe_ext_set_property struct: * * - %DRM_XE_EXEC_QUEUE_SET_PROPERTY_PRIORITY - set the queue priority. * CAP_SYS_NICE is required to set a value above normal. * - %DRM_XE_EXEC_QUEUE_SET_PROPERTY_TIMESLICE - set the queue timeslice * duration in microseconds. * - %DRM_XE_EXEC_QUEUE_SET_PROPERTY_PXP_TYPE - set the type of PXP session * this queue will be used with. Valid values are listed in enum * drm_xe_pxp_session_type. %DRM_XE_PXP_TYPE_NONE is the default behavior, so * there is no need to explicitly set that. When a queue of type * %DRM_XE_PXP_TYPE_HWDRM is created, the PXP default HWDRM session * (%XE_PXP_HWDRM_DEFAULT_SESSION) will be started, if isn't already running. * The user is expected to query the PXP status via the query ioctl (see * %DRM_XE_DEVICE_QUERY_PXP_STATUS) and to wait for PXP to be ready before * attempting to create a queue with this property. When a queue is created * before PXP is ready, the ioctl will return -EBUSY if init is still in * progress or -EIO if init failed. * Given that going into a power-saving state kills PXP HWDRM sessions, * runtime PM will be blocked while queues of this type are alive. * All PXP queues will be killed if a PXP invalidation event occurs. * * The example below shows how to use @drm_xe_exec_queue_create to create * a simple exec_queue (no parallel submission) of class * &DRM_XE_ENGINE_CLASS_RENDER. * * .. code-block:: C * * struct drm_xe_engine_class_instance instance = { * .engine_class = DRM_XE_ENGINE_CLASS_RENDER, * }; * struct drm_xe_exec_queue_create exec_queue_create = { * .extensions = 0, * .vm_id = vm, * .num_bb_per_exec = 1, * .num_eng_per_bb = 1, * .instances = to_user_pointer(&instance), * }; * ioctl(fd, DRM_IOCTL_XE_EXEC_QUEUE_CREATE, &exec_queue_create); * * Allow users to provide a hint to kernel for cases demanding low latency * profile. Please note it will have impact on power consumption. User can * indicate low latency hint with flag while creating exec queue as * mentioned below, * * struct drm_xe_exec_queue_create exec_queue_create = { * .flags = DRM_XE_EXEC_QUEUE_LOW_LATENCY_HINT, * .extensions = 0, * .vm_id = vm, * .num_bb_per_exec = 1, * .num_eng_per_bb = 1, * .instances = to_user_pointer(&instance), * }; * ioctl(fd, DRM_IOCTL_XE_EXEC_QUEUE_CREATE, &exec_queue_create); * */ struct drm_xe_exec_queue_create { #define DRM_XE_EXEC_QUEUE_EXTENSION_SET_PROPERTY 0 #define DRM_XE_EXEC_QUEUE_SET_PROPERTY_PRIORITY 0 #define DRM_XE_EXEC_QUEUE_SET_PROPERTY_TIMESLICE 1 #define DRM_XE_EXEC_QUEUE_SET_PROPERTY_PXP_TYPE 2 /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @width: submission width (number BB per exec) for this exec queue */ __u16 width; /** @num_placements: number of valid placements for this exec queue */ __u16 num_placements; /** @vm_id: VM to use for this exec queue */ __u32 vm_id; #define DRM_XE_EXEC_QUEUE_LOW_LATENCY_HINT (1 << 0) /** @flags: flags to use for this exec queue */ __u32 flags; /** @exec_queue_id: Returned exec queue ID */ __u32 exec_queue_id; /** * @instances: user pointer to a 2-d array of struct * drm_xe_engine_class_instance * * length = width (i) * num_placements (j) * index = j + i * width */ __u64 instances; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_exec_queue_destroy - Input of &DRM_IOCTL_XE_EXEC_QUEUE_DESTROY */ struct drm_xe_exec_queue_destroy { /** @exec_queue_id: Exec queue ID */ __u32 exec_queue_id; /** @pad: MBZ */ __u32 pad; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_exec_queue_get_property - Input of &DRM_IOCTL_XE_EXEC_QUEUE_GET_PROPERTY * * The @property can be: * - %DRM_XE_EXEC_QUEUE_GET_PROPERTY_BAN */ struct drm_xe_exec_queue_get_property { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @exec_queue_id: Exec queue ID */ __u32 exec_queue_id; #define DRM_XE_EXEC_QUEUE_GET_PROPERTY_BAN 0 /** @property: property to get */ __u32 property; /** @value: property value */ __u64 value; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_sync - sync object * * The @type can be: * - %DRM_XE_SYNC_TYPE_SYNCOBJ * - %DRM_XE_SYNC_TYPE_TIMELINE_SYNCOBJ * - %DRM_XE_SYNC_TYPE_USER_FENCE * * and the @flags can be: * - %DRM_XE_SYNC_FLAG_SIGNAL * * A minimal use of @drm_xe_sync looks like this: * * .. code-block:: C * * struct drm_xe_sync sync = { * .flags = DRM_XE_SYNC_FLAG_SIGNAL, * .type = DRM_XE_SYNC_TYPE_SYNCOBJ, * }; * struct drm_syncobj_create syncobj_create = { 0 }; * ioctl(fd, DRM_IOCTL_SYNCOBJ_CREATE, &syncobj_create); * sync.handle = syncobj_create.handle; * ... * use of &sync in drm_xe_exec or drm_xe_vm_bind * ... * struct drm_syncobj_wait wait = { * .handles = &sync.handle, * .timeout_nsec = INT64_MAX, * .count_handles = 1, * .flags = 0, * .first_signaled = 0, * .pad = 0, * }; * ioctl(fd, DRM_IOCTL_SYNCOBJ_WAIT, &wait); */ struct drm_xe_sync { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; #define DRM_XE_SYNC_TYPE_SYNCOBJ 0x0 #define DRM_XE_SYNC_TYPE_TIMELINE_SYNCOBJ 0x1 #define DRM_XE_SYNC_TYPE_USER_FENCE 0x2 /** @type: Type of the this sync object */ __u32 type; #define DRM_XE_SYNC_FLAG_SIGNAL (1 << 0) /** @flags: Sync Flags */ __u32 flags; union { /** @handle: Handle for the object */ __u32 handle; /** * @addr: Address of user fence. When sync is passed in via exec * IOCTL this is a GPU address in the VM. When sync passed in via * VM bind IOCTL this is a user pointer. In either case, it is * the users responsibility that this address is present and * mapped when the user fence is signalled. Must be qword * aligned. */ __u64 addr; }; /** * @timeline_value: Input for the timeline sync object. Needs to be * different than 0 when used with %DRM_XE_SYNC_TYPE_TIMELINE_SYNCOBJ. */ __u64 timeline_value; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_exec - Input of &DRM_IOCTL_XE_EXEC * * This is an example to use @drm_xe_exec for execution of the object * at BIND_ADDRESS (see example in @drm_xe_vm_bind) by an exec_queue * (see example in @drm_xe_exec_queue_create). It can be synchronized * by using the example provided for @drm_xe_sync. * * .. code-block:: C * * struct drm_xe_exec exec = { * .exec_queue_id = exec_queue, * .syncs = &sync, * .num_syncs = 1, * .address = BIND_ADDRESS, * .num_batch_buffer = 1, * }; * ioctl(fd, DRM_IOCTL_XE_EXEC, &exec); * */ struct drm_xe_exec { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @exec_queue_id: Exec queue ID for the batch buffer */ __u32 exec_queue_id; #define DRM_XE_MAX_SYNCS 1024 /** @num_syncs: Amount of struct drm_xe_sync in array. */ __u32 num_syncs; /** @syncs: Pointer to struct drm_xe_sync array. */ __u64 syncs; /** * @address: address of batch buffer if num_batch_buffer == 1 or an * array of batch buffer addresses */ __u64 address; /** * @num_batch_buffer: number of batch buffer in this exec, must match * the width of the engine */ __u16 num_batch_buffer; /** @pad: MBZ */ __u16 pad[3]; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_wait_user_fence - Input of &DRM_IOCTL_XE_WAIT_USER_FENCE * * Wait on user fence, XE will wake-up on every HW engine interrupt in the * instances list and check if user fence is complete:: * * (*addr & MASK) OP (VALUE & MASK) * * Returns to user on user fence completion or timeout. * * The @op can be: * - %DRM_XE_UFENCE_WAIT_OP_EQ * - %DRM_XE_UFENCE_WAIT_OP_NEQ * - %DRM_XE_UFENCE_WAIT_OP_GT * - %DRM_XE_UFENCE_WAIT_OP_GTE * - %DRM_XE_UFENCE_WAIT_OP_LT * - %DRM_XE_UFENCE_WAIT_OP_LTE * * and the @flags can be: * - %DRM_XE_UFENCE_WAIT_FLAG_ABSTIME * - %DRM_XE_UFENCE_WAIT_FLAG_SOFT_OP * * The @mask values can be for example: * - 0xffu for u8 * - 0xffffu for u16 * - 0xffffffffu for u32 * - 0xffffffffffffffffu for u64 */ struct drm_xe_wait_user_fence { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** * @addr: user pointer address to wait on, must qword aligned */ __u64 addr; #define DRM_XE_UFENCE_WAIT_OP_EQ 0x0 #define DRM_XE_UFENCE_WAIT_OP_NEQ 0x1 #define DRM_XE_UFENCE_WAIT_OP_GT 0x2 #define DRM_XE_UFENCE_WAIT_OP_GTE 0x3 #define DRM_XE_UFENCE_WAIT_OP_LT 0x4 #define DRM_XE_UFENCE_WAIT_OP_LTE 0x5 /** @op: wait operation (type of comparison) */ __u16 op; #define DRM_XE_UFENCE_WAIT_FLAG_ABSTIME (1 << 0) /** @flags: wait flags */ __u16 flags; /** @pad: MBZ */ __u32 pad; /** @value: compare value */ __u64 value; /** @mask: comparison mask */ __u64 mask; /** * @timeout: how long to wait before bailing, value in nanoseconds. * Without DRM_XE_UFENCE_WAIT_FLAG_ABSTIME flag set (relative timeout) * it contains timeout expressed in nanoseconds to wait (fence will * expire at now() + timeout). * When DRM_XE_UFENCE_WAIT_FLAG_ABSTIME flat is set (absolute timeout) wait * will end at timeout (uses system MONOTONIC_CLOCK). * Passing negative timeout leads to neverending wait. * * On relative timeout this value is updated with timeout left * (for restarting the call in case of signal delivery). * On absolute timeout this value stays intact (restarted call still * expire at the same point of time). */ __s64 timeout; /** @exec_queue_id: exec_queue_id returned from xe_exec_queue_create_ioctl */ __u32 exec_queue_id; /** @pad2: MBZ */ __u32 pad2; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * enum drm_xe_observation_type - Observation stream types */ enum drm_xe_observation_type { /** @DRM_XE_OBSERVATION_TYPE_OA: OA observation stream type */ DRM_XE_OBSERVATION_TYPE_OA, /** @DRM_XE_OBSERVATION_TYPE_EU_STALL: EU stall sampling observation stream type */ DRM_XE_OBSERVATION_TYPE_EU_STALL, }; /** * enum drm_xe_observation_op - Observation stream ops */ enum drm_xe_observation_op { /** @DRM_XE_OBSERVATION_OP_STREAM_OPEN: Open an observation stream */ DRM_XE_OBSERVATION_OP_STREAM_OPEN, /** @DRM_XE_OBSERVATION_OP_ADD_CONFIG: Add observation stream config */ DRM_XE_OBSERVATION_OP_ADD_CONFIG, /** @DRM_XE_OBSERVATION_OP_REMOVE_CONFIG: Remove observation stream config */ DRM_XE_OBSERVATION_OP_REMOVE_CONFIG, }; /** * struct drm_xe_observation_param - Input of &DRM_XE_OBSERVATION * * The observation layer enables multiplexing observation streams of * multiple types. The actual params for a particular stream operation are * supplied via the @param pointer (use __copy_from_user to get these * params). */ struct drm_xe_observation_param { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @observation_type: observation stream type, of enum @drm_xe_observation_type */ __u64 observation_type; /** @observation_op: observation stream op, of enum @drm_xe_observation_op */ __u64 observation_op; /** @param: Pointer to actual stream params */ __u64 param; }; /** * enum drm_xe_observation_ioctls - Observation stream fd ioctl's * * Information exchanged between userspace and kernel for observation fd * ioctl's is stream type specific */ enum drm_xe_observation_ioctls { /** @DRM_XE_OBSERVATION_IOCTL_ENABLE: Enable data capture for an observation stream */ DRM_XE_OBSERVATION_IOCTL_ENABLE = _IO('i', 0x0), /** @DRM_XE_OBSERVATION_IOCTL_DISABLE: Disable data capture for a observation stream */ DRM_XE_OBSERVATION_IOCTL_DISABLE = _IO('i', 0x1), /** @DRM_XE_OBSERVATION_IOCTL_CONFIG: Change observation stream configuration */ DRM_XE_OBSERVATION_IOCTL_CONFIG = _IO('i', 0x2), /** @DRM_XE_OBSERVATION_IOCTL_STATUS: Return observation stream status */ DRM_XE_OBSERVATION_IOCTL_STATUS = _IO('i', 0x3), /** @DRM_XE_OBSERVATION_IOCTL_INFO: Return observation stream info */ DRM_XE_OBSERVATION_IOCTL_INFO = _IO('i', 0x4), }; /** * enum drm_xe_oa_unit_type - OA unit types */ enum drm_xe_oa_unit_type { /** * @DRM_XE_OA_UNIT_TYPE_OAG: OAG OA unit. OAR/OAC are considered * sub-types of OAG. For OAR/OAC, use OAG. */ DRM_XE_OA_UNIT_TYPE_OAG, /** @DRM_XE_OA_UNIT_TYPE_OAM: OAM OA unit */ DRM_XE_OA_UNIT_TYPE_OAM, /** @DRM_XE_OA_UNIT_TYPE_OAM_SAG: OAM_SAG OA unit */ DRM_XE_OA_UNIT_TYPE_OAM_SAG, }; /** * struct drm_xe_oa_unit - describe OA unit */ struct drm_xe_oa_unit { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @oa_unit_id: OA unit ID */ __u32 oa_unit_id; /** @oa_unit_type: OA unit type of @drm_xe_oa_unit_type */ __u32 oa_unit_type; /** @capabilities: OA capabilities bit-mask */ __u64 capabilities; #define DRM_XE_OA_CAPS_BASE (1 << 0) #define DRM_XE_OA_CAPS_SYNCS (1 << 1) #define DRM_XE_OA_CAPS_OA_BUFFER_SIZE (1 << 2) #define DRM_XE_OA_CAPS_WAIT_NUM_REPORTS (1 << 3) #define DRM_XE_OA_CAPS_OAM (1 << 4) /** @oa_timestamp_freq: OA timestamp freq */ __u64 oa_timestamp_freq; /** @reserved: MBZ */ __u64 reserved[4]; /** @num_engines: number of engines in @eci array */ __u64 num_engines; /** @eci: engines attached to this OA unit */ struct drm_xe_engine_class_instance eci[]; }; /** * struct drm_xe_query_oa_units - describe OA units * * If a query is made with a struct drm_xe_device_query where .query * is equal to DRM_XE_DEVICE_QUERY_OA_UNITS, then the reply uses struct * drm_xe_query_oa_units in .data. * * OA unit properties for all OA units can be accessed using a code block * such as the one below: * * .. code-block:: C * * struct drm_xe_query_oa_units *qoa; * struct drm_xe_oa_unit *oau; * u8 *poau; * * // malloc qoa and issue DRM_XE_DEVICE_QUERY_OA_UNITS. Then: * poau = (u8 *)&qoa->oa_units[0]; * for (int i = 0; i < qoa->num_oa_units; i++) { * oau = (struct drm_xe_oa_unit *)poau; * // Access 'struct drm_xe_oa_unit' fields here * poau += sizeof(*oau) + oau->num_engines * sizeof(oau->eci[0]); * } */ struct drm_xe_query_oa_units { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @num_oa_units: number of OA units returned in oau[] */ __u32 num_oa_units; /** @pad: MBZ */ __u32 pad; /** * @oa_units: struct @drm_xe_oa_unit array returned for this device. * Written below as a u64 array to avoid problems with nested flexible * arrays with some compilers */ __u64 oa_units[]; }; /** * enum drm_xe_oa_format_type - OA format types as specified in PRM/Bspec * 52198/60942 */ enum drm_xe_oa_format_type { /** @DRM_XE_OA_FMT_TYPE_OAG: OAG report format */ DRM_XE_OA_FMT_TYPE_OAG, /** @DRM_XE_OA_FMT_TYPE_OAR: OAR report format */ DRM_XE_OA_FMT_TYPE_OAR, /** @DRM_XE_OA_FMT_TYPE_OAM: OAM report format */ DRM_XE_OA_FMT_TYPE_OAM, /** @DRM_XE_OA_FMT_TYPE_OAC: OAC report format */ DRM_XE_OA_FMT_TYPE_OAC, /** @DRM_XE_OA_FMT_TYPE_OAM_MPEC: OAM SAMEDIA or OAM MPEC report format */ DRM_XE_OA_FMT_TYPE_OAM_MPEC, /** @DRM_XE_OA_FMT_TYPE_PEC: PEC report format */ DRM_XE_OA_FMT_TYPE_PEC, }; /** * enum drm_xe_oa_property_id - OA stream property id's * * Stream params are specified as a chain of @drm_xe_ext_set_property * struct's, with @property values from enum @drm_xe_oa_property_id and * @drm_xe_user_extension base.name set to @DRM_XE_OA_EXTENSION_SET_PROPERTY. * @param field in struct @drm_xe_observation_param points to the first * @drm_xe_ext_set_property struct. * * Exactly the same mechanism is also used for stream reconfiguration using the * @DRM_XE_OBSERVATION_IOCTL_CONFIG observation stream fd ioctl, though only a * subset of properties below can be specified for stream reconfiguration. */ enum drm_xe_oa_property_id { #define DRM_XE_OA_EXTENSION_SET_PROPERTY 0 /** * @DRM_XE_OA_PROPERTY_OA_UNIT_ID: ID of the OA unit on which to open * the OA stream, see @oa_unit_id in 'struct * drm_xe_query_oa_units'. Defaults to 0 if not provided. */ DRM_XE_OA_PROPERTY_OA_UNIT_ID = 1, /** * @DRM_XE_OA_PROPERTY_SAMPLE_OA: A value of 1 requests inclusion of raw * OA unit reports or stream samples in a global buffer attached to an * OA unit. */ DRM_XE_OA_PROPERTY_SAMPLE_OA, /** * @DRM_XE_OA_PROPERTY_OA_METRIC_SET: OA metrics defining contents of OA * reports, previously added via @DRM_XE_OBSERVATION_OP_ADD_CONFIG. */ DRM_XE_OA_PROPERTY_OA_METRIC_SET, /** @DRM_XE_OA_PROPERTY_OA_FORMAT: OA counter report format */ DRM_XE_OA_PROPERTY_OA_FORMAT, /* * OA_FORMAT's are specified the same way as in PRM/Bspec 52198/60942, * in terms of the following quantities: a. enum @drm_xe_oa_format_type * b. Counter select c. Counter size and d. BC report. Also refer to the * oa_formats array in drivers/gpu/drm/xe/xe_oa.c. */ #define DRM_XE_OA_FORMAT_MASK_FMT_TYPE (0xffu << 0) #define DRM_XE_OA_FORMAT_MASK_COUNTER_SEL (0xffu << 8) #define DRM_XE_OA_FORMAT_MASK_COUNTER_SIZE (0xffu << 16) #define DRM_XE_OA_FORMAT_MASK_BC_REPORT (0xffu << 24) /** * @DRM_XE_OA_PROPERTY_OA_PERIOD_EXPONENT: Requests periodic OA unit * sampling with sampling frequency proportional to 2^(period_exponent + 1) */ DRM_XE_OA_PROPERTY_OA_PERIOD_EXPONENT, /** * @DRM_XE_OA_PROPERTY_OA_DISABLED: A value of 1 will open the OA * stream in a DISABLED state (see @DRM_XE_OBSERVATION_IOCTL_ENABLE). */ DRM_XE_OA_PROPERTY_OA_DISABLED, /** * @DRM_XE_OA_PROPERTY_EXEC_QUEUE_ID: Open the stream for a specific * @exec_queue_id. OA queries can be executed on this exec queue. */ DRM_XE_OA_PROPERTY_EXEC_QUEUE_ID, /** * @DRM_XE_OA_PROPERTY_OA_ENGINE_INSTANCE: Optional engine instance to * pass along with @DRM_XE_OA_PROPERTY_EXEC_QUEUE_ID or will default to 0. */ DRM_XE_OA_PROPERTY_OA_ENGINE_INSTANCE, /** * @DRM_XE_OA_PROPERTY_NO_PREEMPT: Allow preemption and timeslicing * to be disabled for the stream exec queue. */ DRM_XE_OA_PROPERTY_NO_PREEMPT, /** * @DRM_XE_OA_PROPERTY_NUM_SYNCS: Number of syncs in the sync array * specified in @DRM_XE_OA_PROPERTY_SYNCS */ DRM_XE_OA_PROPERTY_NUM_SYNCS, /** * @DRM_XE_OA_PROPERTY_SYNCS: Pointer to struct @drm_xe_sync array * with array size specified via @DRM_XE_OA_PROPERTY_NUM_SYNCS. OA * configuration will wait till input fences signal. Output fences * will signal after the new OA configuration takes effect. For * @DRM_XE_SYNC_TYPE_USER_FENCE, @addr is a user pointer, similar * to the VM bind case. */ DRM_XE_OA_PROPERTY_SYNCS, /** * @DRM_XE_OA_PROPERTY_OA_BUFFER_SIZE: Size of OA buffer to be * allocated by the driver in bytes. Supported sizes are powers of * 2 from 128 KiB to 128 MiB. When not specified, a 16 MiB OA * buffer is allocated by default. */ DRM_XE_OA_PROPERTY_OA_BUFFER_SIZE, /** * @DRM_XE_OA_PROPERTY_WAIT_NUM_REPORTS: Number of reports to wait * for before unblocking poll or read */ DRM_XE_OA_PROPERTY_WAIT_NUM_REPORTS, }; /** * struct drm_xe_oa_config - OA metric configuration * * Multiple OA configs can be added using @DRM_XE_OBSERVATION_OP_ADD_CONFIG. A * particular config can be specified when opening an OA stream using * @DRM_XE_OA_PROPERTY_OA_METRIC_SET property. */ struct drm_xe_oa_config { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @uuid: String formatted like "%\08x-%\04x-%\04x-%\04x-%\012x" */ char uuid[36]; /** @n_regs: Number of regs in @regs_ptr */ __u32 n_regs; /** * @regs_ptr: Pointer to (register address, value) pairs for OA config * registers. Expected length of buffer is: (2 * sizeof(u32) * @n_regs). */ __u64 regs_ptr; }; /** * struct drm_xe_oa_stream_status - OA stream status returned from * @DRM_XE_OBSERVATION_IOCTL_STATUS observation stream fd ioctl. Userspace can * call the ioctl to query stream status in response to EIO errno from * observation fd read(). */ struct drm_xe_oa_stream_status { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @oa_status: OA stream status (see Bspec 46717/61226) */ __u64 oa_status; #define DRM_XE_OASTATUS_MMIO_TRG_Q_FULL (1 << 3) #define DRM_XE_OASTATUS_COUNTER_OVERFLOW (1 << 2) #define DRM_XE_OASTATUS_BUFFER_OVERFLOW (1 << 1) #define DRM_XE_OASTATUS_REPORT_LOST (1 << 0) /** @reserved: reserved for future use */ __u64 reserved[3]; }; /** * struct drm_xe_oa_stream_info - OA stream info returned from * @DRM_XE_OBSERVATION_IOCTL_INFO observation stream fd ioctl */ struct drm_xe_oa_stream_info { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @oa_buf_size: OA buffer size */ __u64 oa_buf_size; /** @reserved: reserved for future use */ __u64 reserved[3]; }; /** * enum drm_xe_pxp_session_type - Supported PXP session types. * * We currently only support HWDRM sessions, which are used for protected * content that ends up being displayed, but the HW supports multiple types, so * we might extend support in the future. */ enum drm_xe_pxp_session_type { /** @DRM_XE_PXP_TYPE_NONE: PXP not used */ DRM_XE_PXP_TYPE_NONE = 0, /** * @DRM_XE_PXP_TYPE_HWDRM: HWDRM sessions are used for content that ends * up on the display. */ DRM_XE_PXP_TYPE_HWDRM = 1, }; /* ID of the protected content session managed by Xe when PXP is active */ #define DRM_XE_PXP_HWDRM_DEFAULT_SESSION 0xf /** * enum drm_xe_eu_stall_property_id - EU stall sampling input property ids. * * These properties are passed to the driver at open as a chain of * @drm_xe_ext_set_property structures with @property set to these * properties' enums and @value set to the corresponding values of these * properties. @drm_xe_user_extension base.name should be set to * @DRM_XE_EU_STALL_EXTENSION_SET_PROPERTY. * * With the file descriptor obtained from open, user space must enable * the EU stall stream fd with @DRM_XE_OBSERVATION_IOCTL_ENABLE before * calling read(). EIO errno from read() indicates HW dropped data * due to full buffer. */ enum drm_xe_eu_stall_property_id { #define DRM_XE_EU_STALL_EXTENSION_SET_PROPERTY 0 /** * @DRM_XE_EU_STALL_PROP_GT_ID: @gt_id of the GT on which * EU stall data will be captured. */ DRM_XE_EU_STALL_PROP_GT_ID = 1, /** * @DRM_XE_EU_STALL_PROP_SAMPLE_RATE: Sampling rate in * GPU cycles from @sampling_rates in struct @drm_xe_query_eu_stall */ DRM_XE_EU_STALL_PROP_SAMPLE_RATE, /** * @DRM_XE_EU_STALL_PROP_WAIT_NUM_REPORTS: Minimum number of * EU stall data reports to be present in the kernel buffer * before unblocking a blocked poll or read. */ DRM_XE_EU_STALL_PROP_WAIT_NUM_REPORTS, }; /** * struct drm_xe_query_eu_stall - Information about EU stall sampling. * * If a query is made with a struct @drm_xe_device_query where .query * is equal to @DRM_XE_DEVICE_QUERY_EU_STALL, then the reply uses * struct @drm_xe_query_eu_stall in .data. */ struct drm_xe_query_eu_stall { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @capabilities: EU stall capabilities bit-mask */ __u64 capabilities; #define DRM_XE_EU_STALL_CAPS_BASE (1 << 0) /** @record_size: size of each EU stall data record */ __u64 record_size; /** @per_xecore_buf_size: internal per XeCore buffer size */ __u64 per_xecore_buf_size; /** @reserved: Reserved */ __u64 reserved[5]; /** @num_sampling_rates: Number of sampling rates in @sampling_rates array */ __u64 num_sampling_rates; /** * @sampling_rates: Flexible array of sampling rates * sorted in the fastest to slowest order. * Sampling rates are specified in GPU clock cycles. */ __u64 sampling_rates[]; }; /** * struct drm_xe_madvise - Input of &DRM_IOCTL_XE_MADVISE * * This structure is used to set memory attributes for a virtual address range * in a VM. The type of attribute is specified by @type, and the corresponding * union member is used to provide additional parameters for @type. * * Supported attribute types: * - DRM_XE_MEM_RANGE_ATTR_PREFERRED_LOC: Set preferred memory location. * - DRM_XE_MEM_RANGE_ATTR_ATOMIC: Set atomic access policy. * - DRM_XE_MEM_RANGE_ATTR_PAT: Set page attribute table index. * * Example: * * .. code-block:: C * * struct drm_xe_madvise madvise = { * .vm_id = vm_id, * .start = 0x100000, * .range = 0x2000, * .type = DRM_XE_MEM_RANGE_ATTR_ATOMIC, * .atomic_val = DRM_XE_ATOMIC_DEVICE, * }; * * ioctl(fd, DRM_IOCTL_XE_MADVISE, &madvise); * */ struct drm_xe_madvise { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @start: start of the virtual address range */ __u64 start; /** @range: size of the virtual address range */ __u64 range; /** @vm_id: vm_id of the virtual range */ __u32 vm_id; #define DRM_XE_MEM_RANGE_ATTR_PREFERRED_LOC 0 #define DRM_XE_MEM_RANGE_ATTR_ATOMIC 1 #define DRM_XE_MEM_RANGE_ATTR_PAT 2 /** @type: type of attribute */ __u32 type; union { /** * @preferred_mem_loc: preferred memory location * * Used when @type == DRM_XE_MEM_RANGE_ATTR_PREFERRED_LOC * * Supported values for @preferred_mem_loc.devmem_fd: * - DRM_XE_PREFERRED_LOC_DEFAULT_DEVICE: set vram of fault tile as preferred loc * - DRM_XE_PREFERRED_LOC_DEFAULT_SYSTEM: set smem as preferred loc * * Supported values for @preferred_mem_loc.migration_policy: * - DRM_XE_MIGRATE_ALL_PAGES * - DRM_XE_MIGRATE_ONLY_SYSTEM_PAGES */ struct { #define DRM_XE_PREFERRED_LOC_DEFAULT_DEVICE 0 #define DRM_XE_PREFERRED_LOC_DEFAULT_SYSTEM -1 /** @preferred_mem_loc.devmem_fd: fd for preferred loc */ __u32 devmem_fd; #define DRM_XE_MIGRATE_ALL_PAGES 0 #define DRM_XE_MIGRATE_ONLY_SYSTEM_PAGES 1 /** @preferred_mem_loc.migration_policy: Page migration policy */ __u16 migration_policy; /** @preferred_mem_loc.pad : MBZ */ __u16 pad; /** @preferred_mem_loc.reserved : Reserved */ __u64 reserved; } preferred_mem_loc; /** * @atomic: Atomic access policy * * Used when @type == DRM_XE_MEM_RANGE_ATTR_ATOMIC. * * Supported values for @atomic.val: * - DRM_XE_ATOMIC_UNDEFINED: Undefined or default behaviour. * Support both GPU and CPU atomic operations for system allocator. * Support GPU atomic operations for normal(bo) allocator. * - DRM_XE_ATOMIC_DEVICE: Support GPU atomic operations. * - DRM_XE_ATOMIC_GLOBAL: Support both GPU and CPU atomic operations. * - DRM_XE_ATOMIC_CPU: Support CPU atomic only, no GPU atomics supported. */ struct { #define DRM_XE_ATOMIC_UNDEFINED 0 #define DRM_XE_ATOMIC_DEVICE 1 #define DRM_XE_ATOMIC_GLOBAL 2 #define DRM_XE_ATOMIC_CPU 3 /** @atomic.val: value of atomic operation */ __u32 val; /** @atomic.pad: MBZ */ __u32 pad; /** @atomic.reserved: Reserved */ __u64 reserved; } atomic; /** * @pat_index: Page attribute table index * * Used when @type == DRM_XE_MEM_RANGE_ATTR_PAT. */ struct { /** @pat_index.val: PAT index value */ __u32 val; /** @pat_index.pad: MBZ */ __u32 pad; /** @pat_index.reserved: Reserved */ __u64 reserved; } pat_index; }; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_mem_range_attr - Output of &DRM_IOCTL_XE_VM_QUERY_MEM_RANGES_ATTRS * * This structure is provided by userspace and filled by KMD in response to the * DRM_IOCTL_XE_VM_QUERY_MEM_RANGES_ATTRS ioctl. It describes memory attributes of * a memory ranges within a user specified address range in a VM. * * The structure includes information such as atomic access policy, * page attribute table (PAT) index, and preferred memory location. * Userspace allocates an array of these structures and passes a pointer to the * ioctl to retrieve attributes for each memory ranges * * @extensions: Pointer to the first extension struct, if any * @start: Start address of the memory range * @end: End address of the virtual memory range * */ struct drm_xe_mem_range_attr { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @start: start of the memory range */ __u64 start; /** @end: end of the memory range */ __u64 end; /** @preferred_mem_loc: preferred memory location */ struct { /** @preferred_mem_loc.devmem_fd: fd for preferred loc */ __u32 devmem_fd; /** @preferred_mem_loc.migration_policy: Page migration policy */ __u32 migration_policy; } preferred_mem_loc; /** @atomic: Atomic access policy */ struct { /** @atomic.val: atomic attribute */ __u32 val; /** @atomic.reserved: Reserved */ __u32 reserved; } atomic; /** @pat_index: Page attribute table index */ struct { /** @pat_index.val: PAT index */ __u32 val; /** @pat_index.reserved: Reserved */ __u32 reserved; } pat_index; /** @reserved: Reserved */ __u64 reserved[2]; }; /** * struct drm_xe_vm_query_mem_range_attr - Input of &DRM_IOCTL_XE_VM_QUERY_MEM_ATTRIBUTES * * This structure is used to query memory attributes of memory regions * within a user specified address range in a VM. It provides detailed * information about each memory range, including atomic access policy, * page attribute table (PAT) index, and preferred memory location. * * Userspace first calls the ioctl with @num_mem_ranges = 0, * @sizeof_mem_ranges_attr = 0 and @vector_of_vma_mem_attr = NULL to retrieve * the number of memory regions and size of each memory range attribute. * Then, it allocates a buffer of that size and calls the ioctl again to fill * the buffer with memory range attributes. * * If second call fails with -ENOSPC, it means memory ranges changed between * first call and now, retry IOCTL again with @num_mem_ranges = 0, * @sizeof_mem_ranges_attr = 0 and @vector_of_vma_mem_attr = NULL followed by * Second ioctl call. * * Example: * * .. code-block:: C * * struct drm_xe_vm_query_mem_range_attr query = { * .vm_id = vm_id, * .start = 0x100000, * .range = 0x2000, * }; * * // First ioctl call to get num of mem regions and sizeof each attribute * ioctl(fd, DRM_IOCTL_XE_VM_QUERY_MEM_RANGE_ATTRS, &query); * * // Allocate buffer for the memory region attributes * void *ptr = malloc(query.num_mem_ranges * query.sizeof_mem_range_attr); * void *ptr_start = ptr; * * query.vector_of_mem_attr = (uintptr_t)ptr; * * // Second ioctl call to actually fill the memory attributes * ioctl(fd, DRM_IOCTL_XE_VM_QUERY_MEM_RANGE_ATTRS, &query); * * // Iterate over the returned memory region attributes * for (unsigned int i = 0; i < query.num_mem_ranges; ++i) { * struct drm_xe_mem_range_attr *attr = (struct drm_xe_mem_range_attr *)ptr; * * // Do something with attr * * // Move pointer by one entry * ptr += query.sizeof_mem_range_attr; * } * * free(ptr_start); */ struct drm_xe_vm_query_mem_range_attr { /** @extensions: Pointer to the first extension struct, if any */ __u64 extensions; /** @vm_id: vm_id of the virtual range */ __u32 vm_id; /** @num_mem_ranges: number of mem_ranges in range */ __u32 num_mem_ranges; /** @start: start of the virtual address range */ __u64 start; /** @range: size of the virtual address range */ __u64 range; /** @sizeof_mem_range_attr: size of struct drm_xe_mem_range_attr */ __u64 sizeof_mem_range_attr; /** @vector_of_mem_attr: userptr to array of struct drm_xe_mem_range_attr */ __u64 vector_of_mem_attr; /** @reserved: Reserved */ __u64 reserved[2]; }; #if defined(__cplusplus) } #endif #endif /* _XE_DRM_H_ */